Research Paper

Preparation and Property of Ce-Zr-Al Oxygen Storage Materials Modified by Y3+ and Bi3+ Addition

  • ZHU Qing-Chao ,
  • LI Xiu-Min ,
  • LI Hong-Mei ,
  • ZHENG Ling-Min ,
  • CHEN Yao-Qiang ,
  • GONG Mao-Chu
Expand
  • (Key Laboratory of Green Chemistry & Technology (Ministry of Education), College of Chemistry Sichuan University, Chengdu 610064, China)

Received date: 2009-05-07

  Revised date: 2009-07-20

  Online published: 2010-01-24

Abstract

A series of CeO2-ZrO2-Al2O3 oxygen storage materials were prepared by co-precipitation method and characterized by means of X-ray diffraction (XRD), low temperature nitrogen adsorption-desorption, oxygen storage capacity (OSC) and H2-temperature programmed reduction (H2-TPR). The results of XRD show that the phase structure of CZA are not changed by the addition of Y3+ and Bi3+, and all samples remain the single cubic fluorite structure after calcination at 600℃ and 1000℃. According to the results of low temperature nitrogen adsorption, the textural properties and thermal stability of Ce0.6Zr0.3Y0.1O1.95-Al2O3(CZYA)make a great progress after the introduction of Y3+, and after calcination at 1000℃ for 5h, specific surface area and pore volume of CZYA achieve 80.75m2/g and 0.22mL/g, respectively. The results of OSC and H2-TPR show that co-doping Y3+ and Bi3+ into CZA exhibit positive effect on OSC of the materials. The OSC of Ce0.6Zr0.2Y0.1Bi0.1O1.9-Al2O3(CZYBA)calcinated at 600℃ and 1000℃ reach 461μmol/g and 242μmol/g, respectively. Meanwhile the redox property of CZYBA is enhanced, the reduction peak temperature can be reduced from 546℃ to 429℃ after calcination at 1000℃ for 5h.

Cite this article

ZHU Qing-Chao , LI Xiu-Min , LI Hong-Mei , ZHENG Ling-Min , CHEN Yao-Qiang , GONG Mao-Chu . Preparation and Property of Ce-Zr-Al Oxygen Storage Materials Modified by Y3+ and Bi3+ Addition[J]. Journal of Inorganic Materials, 2010 , 25(1) : 13 -17 . DOI: 10.3724/SP.J.1077.2010.00013

References

[1]Jen H W, Graham G W, Chun W, et al. Catal. Today, 1999, 50(2): 309-328.
[2]Liotta L F, Macaluso A, Longo A, et al. Appl. Catal. A: Gen., 2003, 240(1/2): 295-307.
[3]Kaspar J, Fornasiero P, Hickey N. Catal. Today, 2003, 77(4): 419-449.
[4]Di Monte R, Fornasiero P, Kaspar J, et al. Appl. Catal. B: Environ., 2000, 24(3/4): 157-167.
[5]Fernandez-Garcia M, MartinezArias A, Iglesias-Juez A, et al. J. Catal., 2000, 194(2): 385-392.
[6]Morikawa A, Suzuki T, Kanazawa T, et al. Appl. Catal. B: Environ., 2008, 78(3/4): 210-221.
[7]蔡 黎, 赵 明, 皮 展, 等. 催化学报, 2008, 29(2):108-112.
[8]Wei Z L, Li H M, Zhang X Y, et al. J. Alloy. Compd., 2008, 455(1/2): 322-326.
[9]Kanazawa T, Suzuki J, Takada T, et al. SAE Technical Paper Series No. 2003-01-0811.
[10]Kanazawa T. Catal. Today, 2004, 96(3): 171-177.
[11]Wang J, Wen J, Shen M Q. J. Phys. Chem. C, 2008, 112(13): 5113-5122.
[12]Chuang C C, Hsiang H I, Hwang J S, et al. J. Alloy. Compd., 2009, 470(1/2): 387-392.
[13]Kapar J, Fornasiero P. J. Solid State Chem., 2003, 171(1/2): 19-29.
[14]Abrahams I, Bush A J, Chan S C M, et al. J. Mater. Chem., 2001, 11: 1715-1721.
[15]毛小波, 陈耀强, 钟俊波, 等(MAO Xiao-Bo, et al). 高等学校化学学报(Chemical Journal of Chinese Universities), 2007, 28(3):559-561.
[16]喻 瑶, 林 涛, 张丽娟, 等(YU Yao, et al). 无机材料学报(Journal of Inorganic Materials), 2008, 23(1): 71-76.
[17]郑育英, 黄慧民, 邓淑华, 等(ZHENG Yu-Ying, et al). 无机化学学报(Chinese Journal of Inorganic Chemistry), 2005, 21(8):1227-1230.
[18]Yue B H, Zhou R X, Wang Y J, et al. Appl. Catal. A: Gen., 2005, 295(1): 31-39.
[19]Hu Y C. J. Am. Ceram. Soc., 2006, 89(9): 2949-2951.
[20]Minami K, Masui T, Imanaka N, et al. J. Alloy. Compd., 2006, 408-412: 1132-1135.
[21]Fornasiero P, Di Monte R, Rao Ranga G, et al. J. Catal., 1995, 151(1): 168-177.
[22]Huang T J, Li J F. J. Power Sources, 2008, 181(1): 62-68.
Outlines

/