Research Paper

Influence of Boron Doping on Growth Characteristic of Diamond Films Prepared by Hot Cathode DC Chemical Vapor Deposition

  • Lü Jiang-Wei ,
  • FENG Yu-Jie ,
  • PENG Hong-Yan ,
  • CHEN Yu-Qiang
Expand
  • 1. State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090, China; 2. Department of Physics, Mudanjiang Teachers College, Mudanjiang 157012, China

Received date: 2008-08-04

  Revised date: 2008-09-19

  Online published: 2009-05-20

Abstract

Borondoped diamond films were prepared by hot cathode DC chemical vapor deposition system with B(OCH3)3 as dopant. The influence of boron doping on growth characteristic of diamond films was investigated by plasma optical emission spectroscope, scanning electron microscope (SEM), Raman spectroscope, and X-ray diffraction (XRD). Comparing with the growth process for undoped diamond films, it is found that stable glow discharge can sustain for a long time at low boron doping concentration in hot cathode DC chemical vapor deposition system. The species of glow plasma radicals (Hα、Hβ、C2、CH) do not change after boron doping, while the concentration of C2 radical increases and the concentration of CH radical decreases. The growth rate of boron-doped diamond film increases to 0.65mg·cm-2·h-1. The borondoped diamond films possess well-faceted polycrystalline diamond with (111) dominant orientation, and the quality of boron-doped diamond films is improved in comparison with that of undoped diamond films. Boron atoms in the films are located at the substitutional site or interstitial site in diamond lattice, which do not destroy the diamond crystalline structure.

Cite this article

Lü Jiang-Wei , FENG Yu-Jie , PENG Hong-Yan , CHEN Yu-Qiang . Influence of Boron Doping on Growth Characteristic of Diamond Films Prepared by Hot Cathode DC Chemical Vapor Deposition[J]. Journal of Inorganic Materials, 2009 , 24(3) : 607 -611 . DOI: 10.3724/SP.J.1077.2009.00607

References

1]Larijani M M, Le Normand F, Cregut O. Applied Surface Science, 2007, 253(8): 4051-4059.
[2]Yamada H, Mokuno Y, Chayahara A, et al. Diamond and Related Materials, 2007, 16(3): 576-580.
[3]Chen G C, Li B, Lan H, et al. Diamond and Related Materials, 2007, 16(3): 477-480.
[4]Takeuchi S, Murakawa M. Thin Solid Films, 2000, 377(1): 290-294.
[5]Guzdek I, Szmidt J, Dudek M, et al. Diamond and Related Materials, 2004, 13(4-8): 1059-1061.
[6]Chiang M J, Lung B H, Hon M H. Journal of Crystal Growth, 2000, 211(1-4): 216-219.
[7]Hara T, Yoshitake T, Fukugawa T. et al. Diamond and Related Materials, 2006, 15(4-8): 649-653.
[8]Bai Y Z, Jin S S, Lü X Y,et al. Diamond and Related Materials, 2005, 14(9): 1494-1497.
[9]Suzuki K, Sawabe A, Yasuda H, et al. Applied Physics Letters, 1987, 50(12): 728-729.
[10]Suzuki K, Sawabe A, Inuzuka T. Applied Physics Letters, 1988, 53(19): 1818-1819.
[11]白亦真,金曾孙,姜志刚,等.材料研究学报,2003,19(5):537-540.
Outlines

/