Research Paper

Synthesis of SiC Nanoparticles by Template Confined Method

  • ZHANG Yong ,
  • CHEN Zhi-Zhan ,
  • SHI Er-Wei ,
  • YAN Cheng-Feng ,
  • LIU Xue-Chao
Expand
  • 1.Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China; 2.Graduate University of the Chinese Academy of Sciences, Beijing 100049, China

Received date: 2008-05-07

  Revised date: 2008-06-24

  Online published: 2009-03-20

Abstract

A template confined method was selected to synthesize silicon carbide (SiC) nanoparticles (NPs), where ordered mesoporous silica molecular sieve SBA-15 was chosen as the template and sucrose as the carbon source. Experimental results show that the carbothermal reduction temperature and heating rate are the key parameters on synthesizing SiC NPs. Lower temperature, higher heating rate and shorter reaction time are beneficial to SiC NPs formation, whereas higher temperature, lower heating rate and longer reaction time lead to the formation of SiC nanowires. SiC NPs are obtained at carbothermal reduction temperature of 1400℃ and 75℃/min heating rate. The unique property of SiC NP provides new opportunities for the exploitation of SiC materials. It might substitute the traditional material to work in the rigorous environments.

Cite this article

ZHANG Yong , CHEN Zhi-Zhan , SHI Er-Wei , YAN Cheng-Feng , LIU Xue-Chao . Synthesis of SiC Nanoparticles by Template Confined Method[J]. Journal of Inorganic Materials, 2009 , 24(2) : 285 -290 . DOI: 10.3724/SP.J.1077.2009.00285

References

[1]梁 博, 黄政仁, 江东亮,等 (LIANG Bo, et al). 无机材料学报 (Journal of Inorganic Materials),1996, 11(3): 441-447.
[2]线全刚, 梁 勇, 杨 柯, 等. 沈阳工业大学学报, 2003, 25(2): 170-172.
[3]VixGuterl C, Ehrburger P. Carbon, 1997, 35(10-11): 1587-1592.
[4]VixGuterl C, McEnaney B, Ehrburger P. Journal of the European Ceramic Society, 1999, 19(4): 427-432.
[5]Jin G Q, Guo X. Mesopor. Mater., 2003, 60(1-3): 207-212.
[6]Jin G Q, Liang P, Guo X Y. J. Mater. Sci. Lett., 2003, 22(10): 767-770.
[7]Greil P. J. Eur. Ceram. Soc., 2001, 21(2): 105-118.
[8]Esposito L, Sciti D, Piancastelli A, et al. J. Eur. Ceram. Soc., 2004, 24(2): 533-540.
[9]Vogli E, Mukerji J, Hoffman C, et al. J. Am. Ceram. Soc., 2001, 84(6): 1236-1240.
[10]Ledoux M J, Hantzer S, Huu C P, et al. J. Catal., 1988, 114(1): 176-185.
[11]戴长虹, 杨静漪, 蔺玉胜. 青岛化工学院学报, 1999, 20(1): 25-29.
[12]杨晓云, 黄震威, 吴玉琨, 等. 金属学报, 2000, 36(7): 684-688.
[13]Parmentier J, Patarin J, Dentzer J, et al. Ceram. Int., 2002, 28(1): 1-7.
[14]Yang Z, Xia Y, Mokaya R. Chem. Mater., 2004, 16(20): 3877-3884.
[15]Krawiec P, Weidenthaler C, Kaskel S. Chem. Mater., 2004, 16(15): 2869-2880.
[16]Jun S, Joo S H, Ryoo R, et al. J. Am. Chem. Soc., 2000, 122(43): 10712-10713.
[17]Ryoo R, Joo S H, Jun S. J. Phys. Chem. B., 1999, 103(37): 7743-7746.
[18]Li W Z, Xie S S, Qian L X, et al. Science, 1996, 274(5293): 1701-1703.
[19]Zhang F, Yan Y, Yang H, et al. J. Phys. Chem. B., 2005, 109(18): 8723-8732.
Outlines

/