Adv. Search
Journal of Inorganic Materials

Journal of Inorganic Materials >

2009 , Vol. 24 >Issue 2: 305 - 309

DOI: https://doi.org/10.3724/SP.J.1077.2009.00305

Research Paper

Research of Oxidation Resistance of Short Carbon Fiber Reinforced SiC Composite by Hotpressing

  • ANG Han-Ling ,
  • ZENG Xie-Rong ,
  • XIONG Xin-Bo ,
  • LI Long ,
  • ZOU Ji-Zhao
Expand
  • 1.School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072, China; 2. College of Materials Science and Engineering, Shenzhen University, Shenzhen Key Laboratory of Special Functional Materials, Shenzhen 518060, China

Received date: 2008-05-14

  Revised date: 2008-07-14

  Online published: 2009-03-20

Fold

Abstract

Short carbon fiber reinforced SiC (Csf/SiC) composite was prepared by hotpressing method. XRD, SEM and isothermal oxidation test were used to study the isothermal oxidation property of Csf/SiC composite. The results show that the oxidation weight loss of the composite is the most at 900℃. The weight loss decreases with the oxidation temperatures rising. Below 900℃, the oxidation weight loss of the composites is caused by the carbon fibers oxidation. Above 1450℃, the composites gain weight. Between 900-1450℃, short carbon fibers on the composite surface are oxidized and the SiC matrix forms a protecting film. The inner short carbon fibers still have the strengthen effect for the oxidation layer and matrix protecting them from oxidation, and the composites have good self-resistance oxidation property. When the composites oxide at 1600℃, the composite surface is destroyed badly and lose the resistance oxidation capacity.

Key words： Csf/SiC composite; isothermal oxidation; resistance oxidation property

Cite this article

ANG Han-Ling , ZENG Xie-Rong , XIONG Xin-Bo , LI Long , ZOU Ji-Zhao . Research of Oxidation Resistance of Short Carbon Fiber Reinforced SiC Composite by Hotpressing[J]. Journal of Inorganic Materials, 2009 , 24(2) : 305 -309 . DOI: 10.3724/SP.J.1077.2009.00305

References

［1］堂山昌男, 山本良一(邝心湖译). 尖端材料. 北京:电子工业出版社, 1987:189-192.
［2］Andreas Sonntag. Am. Ceram. Soc. Bull., 1997,76(11):51-54.
［3］Schwetz Karl A(王元化译).国外耐火材料, 1990, (4):1-8.
［4］Clarke R K. J. Am. Ceram. Soc., 1992,75(4):739-758.
［5］Lee Jae-seol, Imai M, Yano T. Mater. Sci. Eng., 2003, A339(1-2): 90-95.
［6］Friedrich Raether, Jurgen Meinhardt,Andreas Kienzle.J. Euro. Ceram. Soc., 2007, 27(2-3):1217-1221.
［7］Ju C P, Wang C K, Cheng H Y,et al. J. Mater. Sci., 2000, 35(17): 4477-4484.
［8］冉丽萍, 易茂中, 黄伯云. 粉末冶金材料科学与工程, 2004, 9(3): 248-253.
［9］Evans A G. J. Am. Ceram. Soc., 1990, 73(2):187-206.
［10］Jian Ke, Chen Zhao-Hui, Ma Qing-Song, et al. Ceram. Int., 2007, 33(1): 73-76.
Options
Outlines

/

〈 〉