Adv. Search
Journal of Inorganic Materials

Journal of Inorganic Materials >

2009 , Vol. 24 >Issue 2: 392 - 396

DOI: https://doi.org/10.3724/SP.J.1077.2009.00392

Research Paper

Effect of Deposition Temperature on Microstructures and Properties of MoSi2
Coatings Prepared by Low Pressure Chemical Vapor Deposition

  • WU Heng ,
  • LI He-Jun ,
  • WANG Yong-Jie ,
  • FU Qian-Gang ,
  • HE Zi-Bo ,
  • WEI Jian-Feng
Expand
  • C/C Composites Technology Research Center, Northwestern Polytechnical University, Xi’an 710072, China

Received date: 2008-07-04

  Revised date: 2008-09-23

  Online published: 2009-03-20

Fold

Abstract

MoSi2 coatings were prepared on Mo substrates by low pressure chemical vapor deposition（LPCVD）using SiCl4 and H2 as source gases, in the temperature range from 1000℃ to 1300℃. Effect of deposition temperature on the microstructures, phase composition, deposition process, deposition rates, hardness and the bonding strength between coatings and Mo matrix were studied. It is indicated that the MoSi2 coatings deposited in the temperature range from 1100℃ to 1200℃ are compact consisting of single MoSi2 phase. The deposition rates, hardness and the bonding strength increase with the increase of temperature；however above 1200℃, cracks and Si phase appear in the coating, the deposition rates, hardness and the bonding strength decrease. The deposition process is mainly controlled by the reaction between Si and Mo below 1100℃, while above 1100℃ the diffusion of Si in MoSi2 coatings becomes the controlling step.

Key words： LPCVD; MoSi2 coatings; microstructures; properties; deposition temperature

Cite this article

WU Heng , LI He-Jun , WANG Yong-Jie , FU Qian-Gang , HE Zi-Bo , WEI Jian-Feng . Effect of Deposition Temperature on Microstructures and Properties of MoSi2
Coatings Prepared by Low Pressure Chemical Vapor Deposition[J]. Journal of Inorganic Materials, 2009 , 24(2) : 392 -396 . DOI: 10.3724/SP.J.1077.2009.00392

References

［1］Kolobov Yu R. International Journal of Refractory Metals & Hard Materials，2003, 21(1-2)：69-73.
［2］Mrotzek T, Hoffmann A, Martin U， et al. International Journal of Refractory Metals & Hard Materials，2006，21(1-2) ：298-305.
［3］陈 程，尹海清，曲选辉，等（CHEN Cheng， et al）.稀有金属材料与工程（Rare Metal Materials and Engineering），2007， 36(7)： 1237-1240.
［4］韩 强（Qiang HAN）.中国钼业（China Molybdenum Industry），2002, 26(4)：32-34.
［5］ZHANG Yu-Lei, LI He-Jun, FU Qian-Gang，et al. Carbon，2007， 45(6)：1130-1133.
［6］FU Qian-Gang, LI He-Jun, LI Ke-Zhi，et al.Carbon, 2006，44(15)：3348-3378.
［7］贾中华(JIA Zhong-Hua).粉末冶金技术(Powder Metallurgy Technology), 2001, 19(2)：74-76.
［8］夏 斌,张 虹,白书欣,等（XIA Bing, et al）. 金属热处理（Heat Treatment of Metals）,2007，32(4)：54-57.
［9］黄金昌(HUANG Jin-Chang).稀有金属快报(Rare Metals Letters),2002,(8)：16-17.
［10］Yoon Jin-Kook，Byun Ji-Young，Kim Gyeung-Ho，et al. Surface and Coatings Technology,2002，155(1)：85-95.
［11］Yoon Jin-Kook， Kim Gyeung-Ho， Byun Ji-young，et al. Surface and Coatings Technology,2003，172(2-3)：176-183.
［12］Choy K L. Progress in Materials Science，2003, 48(1)：57-170.
Options
Outlines

/

〈 〉