Research Paper

Preparation of YBCO Hybrid Materials with Au Dopant by Pulsed Laser Ablation

  • LIN Shan ,
  • ZHANG Wen-gong
Expand
  • (1. College of Materials Engineering of Fujian Agriculture and Forestry University, Fuzhou 350001, China; 2. College of Chemistry and Materials Science, Fujian Normal University, Fuzhou 350007, China)

Received date: 2005-11-21

  Revised date: 2006-03-06

  Online published: 2006-11-20

Abstract

The YBCO precurcor oxide-water sol adulterated with Au clusters was successively prepared by pulsed laser ablation at the interface of Au target submerged in flowing YBCO precurcor oxide-water sol, YBCO precurcor oxide-water sol with Au clusters dopant was first obtained, then YBCO hybrid materials were obtained after calcination in air. The sol was characterized by TEM and the hybrid materials were characterized by XRD and SEM with an EDX analysis. The TEM and XRD results show that the size of YBCO hybrid materials doped with Au clusters is smaller and its crystallization degree is obviously reduced. EDX analysis indicates that there’s no evidence showing the deviation of Y, Ba and Cu in the YBCO hybrid materials, but Au clusters are detected only in a few regions, which indicates that Au clusters may agglomerate during high temperature calcination.

Cite this article

LIN Shan , ZHANG Wen-gong . Preparation of YBCO Hybrid Materials with Au Dopant by Pulsed Laser Ablation[J]. Journal of Inorganic Materials, 2006 , 21(6) : 1496 -1500 . DOI: 10.3724/SP.J.1077.2006.01496

References

[1] Ogale S B, Patil P P, Phase D M, et al. Phys. Rev. B, 1987, 36(16): 8237--8250.
[2] Ogale S B, Polman A F, Quentin O P, et al. Appl. Phys. Lett., 1987, 50(3): 138--140.
[3] 王育煌, 余荣清, 刘朝阳, 等. 高等学校化学学报, 1997, 18(1): 124--126.
[4] Zhang W G, Zhang Y, Tang J Y, et al. In: International Conference on Materials for Advanced Technologies, Singapore, 2001, 232. [5] Zhang Wengong, Zhang Yi, Tang Jieyuan, et al. Thin Solid Films, 2002, 417: 43--46.
[6] 章 仪, 陈文哲, 章文贡, 化学学报, 2003, 61(1): 141--145.
[7] 章 仪, 陈文哲, 章文贡, 高等学校化学学报, 2003, 24(2): 337--339.
[8] Zhang W G, Jin Z G. Science in China, 2003, 33(6): 527--533.
[9] Lu R T, Yan S L, Fang L, et al. Physica C, 2003, 399: 43--47.
[10] Markovi$\acute c$ N, Lau C N, Tinkham M. Physica C, 2003, 387: 44--48.
[11] Zhukov A A, Filby E T, Ghanem M A, et al. Physica C, 2004, 404: 455--459.
[12] Raittila T, Huhtinan H, Paturi P, et al. Physics C, 2002, 371: 90--96.
[13] Xu X L, Guo J D, Wang Y Z, et al. Physics, 2002, 371: 129--132.
[14] Huijbregtse J. Dam M B, Klaassen F C, et al. Physica C, 2000, 341--348: 1985--1986.
[15] Han Song, Li Chao, Liu Zuqin, et al. Nano. Letters., 2004, 4(7): 1241--1246.
[16] Zhang Y F, Tang Y H, Duan X F, et al. Chemical Physics Letters, 2000, 323: 180--184.
[17] Zhou Y X, Lo W, Tang Tong B, et al. [J ]. Supercond Sci. Technol., 2002, 15: 722--726.
[18] Hammerl G, Schmehl A, Schulz R R, et al. Nature, 2000, 407: 162--164.
[19] 唐福龙, 袁润章, 袁启华(Tang Fu-Long, et al). 无机材料学报(Journal of Inorganic Materials), 1994, 9(2): 191--196.
[20] 章文贡, 章 仪, 中国实用新型专利, ZL02255143, 2003.
Outlines

/