Journal of Inorganic Materials >
Effects of ZnO Modification on the Electrochemical Performance of Fe1.5P
Received date: 2009-12-15
Revised date: 2010-01-31
Online published: 2010-07-19
ZnO-modified Fe1.5P powders were synthesized successfully via a rheological phase method. X-ray diffractometry (XRD) was utilized to analyze the composition. TEM was used to characterize the morphology. The effects of ZnO modification on the electrochemical performance of the Fe1.5P were investigated using constant current charge/discharge method, cyclic voltammogram, and electrochemical impedance spectrograph (EIS). The experimental results show that ZnO modification can enhance the rate performance of Fe1.5P. The first discharge capacity of the ZnO-modified Fe1.5P is 837.5mAh/g, and 69.7% higher than that of the pristine Fe1.5P. After 215 cycles, the discharge capacity of the Fe1.5P at 12C rate is increased to 144.3%. Furthermore, ZnO modification improve 330% of the recovery discharge capability of the Fe1.5P at 0.1C rate. In addition, in comparison with the pristine Fe1.5P, ZnO modification reduce 87.9% of the SEIingd SEI film resistance RSEI, 87% of the charge transfer resistance Rd, and 13.2% of the Warburg impedance Wb from the diffusion of lithium ions, while can improve 86.6% of the diffusion efficiency of lithium ions.
Key words： ZnO; Fe1.5P; electrochemical performance; rheological phase method
LI Xiu-Li, WANG Gui-Xin, YAN Kang-Ping, LIU Rui . Effects of ZnO Modification on the Electrochemical Performance of Fe1.5P[J]. Journal of Inorganic Materials, 2010 , 25(8) : 877 -881 . DOI: 10.3724/SP.J.1077.2010.00877
[1]Silva D C C, Crosnier O, Ouvrard G, et al. Reversible lithium uptake by FeP2. Electrochem. Solid-State Lett., 2003, 6(8): A162-A165.
[2]Boyanov S, Bernardi J, Gillot F, et al. FeP: another attractive anode for the Li-ion battery enlisting a reversible two-step insertion/conversion process.Chem. Mater,2006, 18(15):3531-3538
[3]Boyanov S, Womes M, Monconduit L, et al. Mossbauer spectroscopy and magnetic measurements as complementary techniques for the phase analysis of FeP electrodes cycling in Li-ion batteries.Chem. Mater,2009, 21(15):3684-3692
[4]Huang L, Zheng X M, Wu Y S, et al. Electrodeposition and lithium storage performance of novel three-dimensional porous Fe–Sb–P amorphous alloy electrode.Electrochem. Commun,2009, 11(3):585-588
[5]Fu L J, Liu H, Zhang H P, et al. Synthesis and electrochemical performance of novel core/shell structured nanocomposites.Electrochem. Commun,2006, 8(1):1-4
[6]Yan G F, Fang H S, Li G S, et al. Improved electrochemical performance of Mg-doped ZnO thin film as anode material for lithium ion batteries. Chinese J. Struct. Chem., 2009, 28(4): 409-413.
[7]Sun Y K, Hong K J, Prakash J, et al. Electrochemical performance of nano-sized ZnO-coated LiNi0.5Mn1.5O4 spinel as 5 V materials at elevated temperatures. Electrochem. Commun., 2002, 4(4): 344-348.
[8]许 惠, 钟 辉(XU Hui, et al). 流变相-喷雾干燥法合成LiCo0.3Ni0.7O2正极材料的研究. 无机材料学报(Journal of Inorganic Materials), 2004, 19(3): 497-502.
[9]Chang C X, Xiang J F, Shi X X, et al. Rheological phase reaction synthesis and electrochemical performance of Li3V2(PO4)3/carbon cathode for lithium ion batteries.Electrochim. Acta,2008, 53 (5):2232-2237
[10]李思温, 杨维慎, 林励吾. 两个新的具有高透氧能力的氧化物. 科学通报, 1997, 42(6): 615-616.
[11]Dean J A. 兰式手册, 15版. New York: McGraw-Hill,1999: 6. 81- 6.123.
[12]Barral G., Diard J P, Gorrec B L, et al. Determination of the diffusion coefficient of an inserted species by impedance spectroscopy: application to the H/HxNb2O5 system. J. Appl. Electrochem., 1993, 23(2): 93-97.
[13]Myung S T, Komaba S, Hirosaki N, et al. Emulsion drying synthesis of olivine LiFePO4/C composite and its electrochemical properties as lithium intercalation material.Electrochim. Acta,2004, 49(24):4213-4222
/
| 〈 |
|
〉 |
