Journal of Inorganic Materials >
Preparation and High-temperature Properties of Nanostructured CeO2/ZrO2-Y2O3 Thermal Barrier Coating
Received date: 2009-11-09
Revised date: 2010-03-11
Online published: 2010-07-19
The nanosized ZrO2-8wt%Y2O3 (YSZ) and CeO2/ZrO2-8wt%Y2O3(CYZ) particles were agglomerated as powder feedstocks. Thermal barrier coatings were prepared on the GH30 high temperature alloy surface by atmospheric plasma spray. The microstructures of the agglomerated powders doped with 25wt% CeO2 particles and the coating were characterized using scanning electron microscope (SEM), transmission electron microscope (TEM) and X-ray diffraction (XRD) technology. The thermal shocks resistance of the ZrO2-8wt%Y2O3 (YSZ) and CeO2/ZrO2-8wt%Y2O3 (CYZ) coatings were tested at 900℃,1100℃ and 1300℃. The oxidation resistance testing of coatings were tested at 1050℃ for 100h. The results show that the nano-powder by agglomerated treatment is porous spherical. The phase compositons of the nano-CYZ coating are relatively stable t phase (t-ZrO2, t-Zr0.82Y0.18O1.91, t-Zr0.82Ce0.18O2) and c phase (c-CeO2). The average grain size of the CYZ coating is about 45nm. The nanostructured CeO2/ZrO2-Y2O3 coating exhibit higher thermal-shock and oxidation resistances than those of the nano-YSZ coating.
GONG Wen-Biao, LI Yu-Peng, LIU Wei, SUN Da-Qian, WANG Wen-Quan . Preparation and High-temperature Properties of Nanostructured CeO2/ZrO2-Y2O3 Thermal Barrier Coating[J]. Journal of Inorganic Materials, 2010 , 25(8) : 860 -864 . DOI: 10.3724/SP.J.1077.2010.00860
[1]Schulz U, Leyens C, Fritscher K. Some recent trends in research and technology of advanced thermal barrier coatings.Aerospace Science and Technology,2003, 7(1):73-80
[2]Evans A G, Mumm D R, Hutchinson J W, et al. Mechanisms controlling the durability of thermal barrier coatings.Progress in Materials Science,2001, 46(5):505-553
[3]DeMasi-Marcin J T, Gupta D K. Protective coatings in the gas turbine engine.Surface and Coatings Technology,1994, 68-69:1-9
[4]Lima R S, Kucuk A, Berndt C C. Integrity of nanostructured partially stabilized zirconia after plasma spray processing.Materials Science and Engineering A,2001, 313(1/2):75-82
[5]Wang W Q, Sha C K , Sun D Q, et al. Microstructural feature, thermal shock resistance and isothermal oxidation resistance of nanostructured zirconia coating.Materials Science and Engineering A,2006, 424(1/2):1-5
[6]Chen H, Ding C X. Nanostructured zirconia coating prepared by atmospheric plasma spraying.Surface and Coatings Technology,2002, 150(1):31-36
[7]陈 煌, 林新华, 曾 毅, 等(CHEN Huang, et al). 热喷涂纳米陶瓷涂层研究进展. 硅酸盐学报(Journal of the Chinese Ceramic Society), 2002, 30(2): 235-239.
[8]陈 煌, 周霞明, 黄民辉, 等(CHEN Huang, et al). 纳米ZrO2等离子涂层的结构, 性能和工艺特点. 无机材料学报(Journal of Inorganic Materials), 2003, 18(4): 911-916.
[9]陈 煌, 丁传贤(CHEN Huang, et al). 等离子喷涂氧化锆纳米涂层显微结构研究. 无机材料学报( Journal of Inorganic Materials), 2002, 17(4): 882-886.
[10]梁 波, 丁传贤(LIANG Bo, et al). 氧化锆纳米等离子涂层的结构与热震性能研究. 无机材料学报( Journal of Inorganic Materials), 2006, 21(1): 250-256.
[11]Kear B H, Skandan G. Theraml spray processing of nanoscale materials.Nanostructure Materials,1997, 8(6):765-769
[12]Park S Y, Kim J H, Kim M C, et al. Microscopic observation of degradation behavior in yttria and ceria stabilized zirconia thermal barrier coatings under hot corrosion.Surface Coatings & Technology,2005, 190(2/3):357-365
[13]Lee C H, Kim H K, Choi H S, et al. Phase transformation and bond coat oxidation behavior of plasma-sprayed zirconia thermal barrier coating.Surface Coatings and Technology,2000, 124(11):1-12
[14]Huang P J, Swab J J, Patel P J, et al. Evaluation of CeSZ Thermal Barrier Coatings for Diesels. Proceedings of the 1st International Thermal Spray Conference, ASM International, Materials Park, OH, Canada, 2000: 1179-1182.
[15]Choi Hanshin, Kim Hyungjun, Lee Changhee. Phase evolution of plasma sprayed ceria and yttria stabilized zirconia thermal barrier coating.Journal of Materials Science Letters,2002, 21(17):1359-1361
[16]Cao X, Vassen R, Fischer W. Lanthanum-cerium oxide as a thermal barrier-coating material for high-temperature applications.Advanced Materials,2003, 15(17):1438-1442
[17]Lima R S, Kucuka A, Berndt C C. Evaluation of micro-hardness and elastic modulus of thermally sprayed nanostructured zirconia coatings.Surface and Coatings Technology,2001, 135(2/3):166-172
[18]Khor K A, Gu Y W, Dong Z L. Properties of Plasma Sprayed Functionally Graded YSZ/NiCoCrAlY Composite Coatings. Proceedings of the 1st International Thermal Spray Conference, ASM Inernational, Materials Park, OH, Canada, 2000: 1241-1247.
[19]Scrivani A, Bardi U. On the Experimental Correlation Between Plasma Spray Process Conditions and Yttria Partially Stabillized Zirconia Coatings Properties. Proceedings of the 1st International Thermal Spray Conference, ASM Inernational, Materials Park, OH, Canada, 2000: 1207-1210.
[20]Cole M A, Walker R. High Temperature Erosion Properties of Thermal Barrier Coatings Produced by Acetylene Sprayed High Velocity Oxygen Fuel Process. Proceedings of the 1st International Thermal Spray Conference, ASM Inernational, Materials Park, OH, Canada, 2000: 1191-1200.
[21]Gleiter H. Nanocrystalline materials.Progress in Materials Science,1989, 33(4):223-315
[22]Gupta K T, Bechtold J H, Kuznicki R C, et al. Stabilization of tetragonal phase in polycrystalline zirconia.Journal of Material Science,1977, 12(12):2421-2426
[23]Gong W B, Sha C K, Sun D Q, et al. Microstructures and thermal insulation capability of plasma-sprayed nanostructured ceria stabilized zirconia coatings.Surface & Coatings Technology,2006, 201(6):3109-3115
[24]Wright P K, Evans A G. Mechanisms governing the performance of thermal barrier coatings.Current Opinion in Solid State and Materials Science,1999, 4(3):255-265
/
〈 |
|
〉 |