Adv. Search
Journal of Inorganic Materials

Journal of Inorganic Materials >

2010 , Vol. 25 >Issue 8: 829 - 834

DOI: https://doi.org/10.3724/SP.J.1077.2010.00829

Research Paper

Preparation and Properties of Electromagnetic Wave Absorption Materials BaTiO3/MWCNT and Derived PAN Hybrid Fibers

Expand
  • (State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Engineering Research Center of Advanced Glasses Manufacturing Technology, MOE, Donghua University, Shanghai 201620, China)

Received date: 2009-12-21

  Revised date: 2010-02-05

  Online published: 2010-07-19

Fold

Abstract

BaTiO3/multi-walled carbon nanotubes (MWCNTs) composite was synthesized by an efficient solvent-thermal route. Transmission electron microscope images clearly indicate that the surfaces of the MWCNTs are uniformly decorated by well-crystallized BaTiO3 particles with diameters of 15-30 nm. The result of Electromagnetic (EM) wave absorption properties analysis, determined by the EM parameters, shows that the reflection loss (RL) in the BaTiO3/MWCNT composite is higher than that occurring in pure MWCNTs or BaTiO3, which resulted from the better matched characteristic impedance and enhanced complex permeability in the high frequency. The maximum RL of –37.5 dB in the BaTiO3/MWCNT composite is obtained at a frequency of 10.4 GHz and the absorption range is under –10 dB in the frequency range of 9.6–13.1GHz with the absorber thickness of 2 mm.  BaTiO3/MWCNT/PAN hybrid fibres, derived from a PAN solution containing 10 wt% BaTiO3/MWCNT composite, were prepared by the electrospinning process. The results of XRD and SEM indicated that both the structure of  BaTiO3/MWCNT composite and the morphology of PAN changed little after the hybrid process. BaTiO3/MWCNT composite has the well compatibility with PAN matrix.

Key words： multi-walled carbon nanotubes; BaTiO3 nanoparticle; electromagnetic wave absorbing-ability; PAN hybrid fiber

Cite this article

BI Cheng, ZHU Mei-Fang, ZHANG Qing-Hong, LI Yao-Gang, WANG Hong-Zhi . Preparation and Properties of Electromagnetic Wave Absorption Materials BaTiO3/MWCNT and Derived PAN Hybrid Fibers[J]. Journal of Inorganic Materials, 2010 , 25(8) : 829 -834 . DOI: 10.3724/SP.J.1077.2010.00829

References

[1]Fan Z J, Luo G H, Zhang Z F, et al. Electromagnetic and microwave absorbing properties of multi-walled carbon nanotubes/ polymer composites.Mater. Sci. Eng. B,2006, 132(1/2):85-89
[2]Kim H M, Kim K, Lee C Y, et al. Electrical conductivity and electromagnetic interference shielding of multiwalled carbon nanotube composites containing Fe catalyst.Appl. Phys. Lett,2004, 84(26):589-591
[3]Kong L R, Lu X F, Zhang W J. Facile synthesis of multifunctional multiwalled carbon nanotubes/Fe3O4 nanoparticles/ polyaniline composite nanotubes.J. Solid State Chem,2008, 181(3):628-636
[4]Zhang H, Du N, Wu P, et al. Functionalization of carbon nanotubes with magnetic nanoparticles: general nonaqueous synthesis and magnetic properties.Nanotechnology,2008, 19(31):315604-1
[5]Pu H T, Jiang F J. Towards high sedimentation stability: magnetorheological fluids based on CNT/Fe3O4 nanocomposites.Nanotechnology,2005, 16(9):1486-1489
[6]Abbas S M, Dixit A K, Chatterjee R, et al. Complex permittivity and microwave absorption properties of BaTiO3-polyaniline composite.Mater. Sci. Eng. B,2005, 123(2):167-171
[7]Chen X D, Wang G Q, Duan Y P, et al. Electromagnetic characteristics of barium titanate/epoxide resin composites in X and Ku bands.J. Alloys Compd,2008, 453(1/2):433-436
[8]Liu Y K, Feng Y J, Wu X W, et al. Microwave absorption properties of La doped barium titanate in X-band.J. Alloys Compd,2009, 472(1/2):441-445
[9]Chen X D, Wang G Q, Duan Y P, et al. Microwave absorption properties of barium titanate/epoxide resin composites.J. Phys. D Appl. Phys,2007, 40(6):1827-1830

Options
Outlines

/

〈 〉