Journal of Inorganic Materials >
Thermophysical Properties of Air Plasma Sprayed Zirconia Coating Deposited by Reconstituted Nanosize Particles
Received date: 2009-09-24
Revised date: 2009-12-01
Online published: 2010-06-10
Supported by
Chine-France PRA dans ledomaine des mat é riaux 2002 under grant PRA MX02-03 (C.Coddet & C.Ding)
ZrO2-3mol% Y2O3 coating was deposited by air plasma spraying using reconstituted nanosize particles. The microstructure was examined by SEM and TEM. The thermal conductivity was calculated based on the specific heat and thermal diffusivity detected by DSC and laser flash method. The results show that the thermal barrier zirconia coating with thermal conductivity ranging from 0.63-0.80 W/(m·K) is obtained. This can be attributed to the homogeneous distribution of micro-size pores and amounts of micro-cracks with average length of about 10 μm, to which heat flow is nearly perpendicular. The phase transition of t to m can result in the change of thermophysical properties. The grain growth and the decrease of porosity lead to increase of thermal conductiviy of as-sprayed coating.
LIANG Bo, CAI An, CHEN Huang, DING Chuan-Xian . Thermophysical Properties of Air Plasma Sprayed Zirconia Coating Deposited by Reconstituted Nanosize Particles[J]. Journal of Inorganic Materials, 2010 , 25(7) : 695 -699 . DOI: 10.3724/SP.J.1077.2010.00695
[1]Padture N P, Gell M , Jordan E H. Thermal barrier coatings for gas-turbine engine applications. Science, 2002, 296(5566): 280-284.
[2]R-tzer-Scheibe H-J, Schulz U. The effects of heat treatment and gas atmosphere on the thermal conductivityof APS and EB-PVD PYSZ thermal barrier coatings. Surf. Coat. Tech., 2007, 201(18): 7880-7888.
[3]Brandon J R, Taylor R E. Thermal properties of ceria and yttria partially stabilized zirconia thermal barrier coatings. Surf. Coat. Tech., 1989, 39-40(part1): 143-151.
[4]Taylor R E, Wang X, Xu X. Thermophysical properties of thermal barrier coatings. Surf. Coat. Tech.,1999, 120-121: 89-95.
[5]Jang B K, Matsubara H. Influence of porosity on thermophysical properties of nano-porous zirconia coatings grown by electron beamphysical vapour deposition. Scripta. Mater., 2006, 54(9): 1655-1663.
[6]Cernuschi F, Ahmaniemi S, Vuoristo P, et al. Modelling of thermal conductivity of porous materials: application to thick thermal barrier coatings. J. Eur. Ceram. Soc., 2004, 24(9) : 2657-2667.
[7]Zhao H B, Yu F, Bennett T D, et al. Morphology and thermal conductivity of yttria-stabilized zirconia coatings. Acta Materialia, 2006, 54(19): 5195-5207.
[8]Klemens P G, Gell M. Thermal conductivity of thermal barrier coatings. Mater. Sci. Eng. A, 1998, 245(2):143-140.
[9]邓世均. 热障陶瓷涂层的最新发展. 材料保护, 2003, 36(3): 5-7.
[10]David R Clarke. Materials selection guidelines for low thermal conductivity thermal barrier coatings. Surf. Coat. Tech., 2003, 163--164: 67-74.
[11]He J H, Schoenung J M. Nanostructured coatings. Mater. Sci. Eng. A, 2002, 336(1/2): 274-319.
[12]Chen H, Zhou X M, Ding C X. Investigation of the thermomechanical properties of a plasma-sprayed nanostructured zirconia coating. J. Eur. Ceram. Soc., 2003, 23(9): 1449-1455.
[13]TouloukianY S, Buyco E H. Thermophysical Properties of Matter. The TPRC Data Series. 1970, 5: 293.
[14]Hasselman D P H , Johnson L F. Effective thermal conductivity of compositeswith interfacial thermal barrier resistance. J. Compos. Mater., 1987, 21: 508-515.
[15]Barabanenkov Y N, Ivanov V V, Ivanov S N, et al. The scattering of non-equilibrium phonons in Al2O3 nanoceramics. Physica B, 2002, 316-317: 269-272.
[16]Scott H G. Phase relationships in the zirconia system. J. Mater. Sci., 1975, 10(9): 1527-1535.
[17]Liang B, Ding C X. Thermal shock resistances of nanostructured and conventional zirconia coatings deposited by atmospheric plasma spraying. Surf. Coat. Tech., 2005, 191(2/3): 267-273.
/
〈 |
|
〉 |