One-dimensional semiconductor materials Bi2Te3-Te nanocomposites, with a sheet-rod nanostructure can be fabrication on a large scale using Te nanowires as the in-situ template under a simple reflux process, and the yield is high up to 90%. The product was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive X-ray spectroscope (EDS) and transmission electron microscope (TEM). It is a promising way to fabricate one-dimensional nanocrystals of other metals and semiconductors. The influence of KOH, EDTA and reaction time are discussed. The formation mechanism of such a heterostructure is also proposed.
DENG Yuan
,
LI Na
,
WANG Yao
,
YANG Meng
. In-situ Fabrication of Bi2Te3-Te Sheet-rods Using Te Nanowires as Template[J]. Journal of Inorganic Materials, 2010
, 25(6)
: 664
-668
.
DOI: 10.3724/SP.J.1077.2010.00664
[1]Hicks L D, Dresselhaus M S. Effect of quantum-well structures on the thermoelectric figure of merit. Phys. Rev. B, 1993, 47(19): 12727–12731.
[2]Harman T C, Taylor P J, Spears D L, et al. PbTe-based Quantum- dot Thermoelectric Materials with High ZT. Proceedings of the 18th International Conference on Thermoelectrics, Piscataway, 1999: 280-284.
[3]Yu S H, Yoshimura M. Shape and phase control of ZnS nanocrystals: template fabrication of wurtzite ZnS single-crystal nanosheets and ZnO flake-like dendrites from a lamellar molecular precursor ZnS·(NH2CH2CH2NH2)0.5. Adv. Mater., 2002, 14(4): 296-300.
[4]Venkatasubramanian R, Siivola E, Colpitts T, et al. Thin-film thermoelectric devices with high room-temperature figures of merit. Nature, 2001, 413(6856): 597-602.
[5]Simard J M, Vasilevskiy D, Belanqern F, et al. Production of Thermoelectric Materials by Mechanical Alloying-extrusion Process. Proceedings of International Conference on Thermoelectrics, Beijing, 2001: 132-135.
[6]Yang J Y, Aizawa T, Yamamoto A, et al. Thermoelectric properties of n-type (Bi2Se3)x(Bi2Te3)1-x prepared by bulk mechanical alloying and hot pressing. J. Alloys Compd., 2000, 312(2): 326-330.
[7]Zou H L, Rowe D M, Gao M. Growth of p-and n-type bismuth telluride thin films by co-evaporation. J. Cryst. Growth, 2001, 222(1): 82-87.
[8]Zou H L, Rowe D M, Williams S G K. Fabrication of a p-type Sb2Te3 and n-type Bi2Te3 Thin Film. Proceedings of International Conference on Thermoelectrics, Beijing, 2001: 314-317.
[9]Miyazaki Y, Kajitani T. Preparation of Bi2Te3 films by electrodeposition. J. Cryst. Growth, 2001, 229(1-4): 542-546.
[10]Zhang H T, Luo X G, Wang C H, et al. Characterization of nanocrystalline bismuth telluride (Bi2Te3) synthesized by a hydrothermal method. J. Cryst. Growth, 2004, 265(3/4): 558-562.
[11]Ni H L, Zhao X B, Zhu T J, et al. Synthesis and thermoelectric properties of Bi2Te3-based nanocomposites. J. Alloys Compd., 2005, 397(1/2): 317-321.
[12]Zhao X B, Ji X H, Zhang Y H, et al. Hydrothermal synthesis and microstructure investigation of nanostructured bismuth telluride powder. Appl. Phys. A, 2005, 80(7): 1567-1571.
[13]Deng Y, Nan C W, Guo L. A novel approach to Bi2Te3 nanorods by controlling oriented attachment. Chem. Phys. Lett., 2004, 383(5/6): 572-576.
[14]Deng Y, Nan C W, Wei G D, et al. Organic-assisted growth of bismuth telluride nanocrystals. Chem. Phys. Lett., 2003, 374(3/4): 410-415.
[15]Deng Y, Zhou X S, Wei G D, et al. Solvothermal preparation and characterization of nanocrystalline Bi2Te3 powder with different morphology. J. Phys. Chem. Solids, 2002, 63(11): 2119-2121.
[16]Zhao X B, Ji X H, Zhang Y H, et al. Effect of solvent on the microstructures of nanostructured Bi2Te3 prepared by solvothermal synthesis. J. Alloys Compd., 2004, 368(1/2): 349-352.
[17]Lu W G, Ding Y, Chen Y X, et al. Bismuth telluride hexagonal nanoplatelets and their two-step epitaxial growth. J. Am. Chem. Soc., 2005, 127(28): 10112-10116.
[18]Wang W, Lu X L, Zhang T, et al. Bi2Te3/Te multiple heterostructure nanowire arrays formed by confined precipitation. J. Am. Chem. Soc., 2007, 129(21): 6702-6703.
[19]Deng Y, Wei G D, Nan C W. Ligand-assisted control growth of chainlike nanocrystals. Chem. Phys. Lett., 2003, 368(5/6): 639-643.