Journal of Inorganic Materials >
Study on Molding and Performance for Nanometer La0.8Sr0.2MnO3 Massive Material under High
Received date: 2009-10-21
Revised date: 2009-12-10
Online published: 2010-05-12
The La0.8Sr0.2MnO3 massive samples were prepared with crystal grain size about 30nm under high pressure . The structure, grain size and morphology of the samples were characterized by Xray diffraction (XRD) and field emission scanning electron microscope(FESEM). Raman spectra of the samples was carried out by microRaman spectrometer in the range of 100-3000cm-1 with the laser power of 400mW. The results showed that the grain evolution of La0.8Sr0.2MnO3 was influenced by temperature and pressure. When the agglomeration temperature was below 300℃, the grain growth rate increased with increasing pressure at the sintering pressure of 1-3GPa while it fell down as pressure rised continuously at the sintering pressure of 4-5GPa. The grain growth rate increased with increment of pressure when the agglomeration temperature was over 300℃. Physical properties of agglomeration samples synthesized under high pressure were studied. Experimental results indicated that the microhardness of samples increased obviously after high pressure agglomeration. When sintering temperature was 300℃, the resistivity of samples decreased firstly then increased with increment of pressure. The sample prepared under 5GPa at 300℃ had obviously ferromagnetic character at room temperature.
Key words： high pressure; La0.8Sr0.2MnO3 nano-material; performance
HUANG Gao-1 , SHAO Guang-Jie-2 , HU Jie-1 , 2 . Study on Molding and Performance for Nanometer La0.8Sr0.2MnO3 Massive Material under High[J]. Journal of Inorganic Materials, 2010 , 25(5) : 473 -479 . DOI: 10.3724/SP.J.1077.2010.00473
[1]Mohan C R K, Bajpai P K. Effect of sintering optimization on the electrical properties of bulk BaxSr1-xTiO3 ceramics. Physica B, 2008, 403(13-16): 2173-2188.
[2]张 莉, 龚自正, 费英伟. 大块钙钛矿MgSiO3和镁方铁矿(Mg, Fe)O的高压合成. 高压物理学报, 2006, 20(4): 391-396.
[3]胡 婕, 邵光杰, 邢广忠(HU Jie, et al). Sr掺杂对钙钛矿型氧化物LaMnO3电催化性能的影响研究. 中国稀土学报(J. Rare Earth), 2008, 26(3): 351-356.
[4]巫 翔, 秦 善, 吴自玉, 等(WU Xiang, et al). 钙钛矿CaTiO3的超高压结构研究. 物理学报(Acta Physica Sinica), 2004, 53(6): 1967-1971.
[5]Marzi G D, Trodahl H J. The effect of Cu substitution on the A1g mode of La0.7Sr0.3MnO3 manganites. Solid State Communications,2003, 127(4):259-264
[6]Loridant S, Lucazeau G, Le Bihan T. A high pressure Raman and X-ray diffraction study of the perovskite SrCeO3.Journal of Physics and Chemistry of Solids,2002, 63(11):1983-1992
[7]秦秀娟, 邵光杰, 刘日平, 等(QIN Xiu-Juan, et al). 高性能ZnO纳米块体材料的制备及其拉曼光谱学特征. 物理学报(Acta Physica Sinica), 2006, 55(7): 3760-3764.
[8]袁小五, 朱建国, 肖定全, 等(YUAN Xiao-Wu, et al). (Pb0.9-xLa0.1Cax)TiO3纳米微粉的拉曼谱分析. 无机材料学报(Journal of Inorganic Materials), 2003, 18(3): 585-589.
[9]Zhernakov V S, Latysh V V, Zharikov A I, et al. The developing of nanostructured SPD Ti for structural use.Scripta Mater,2001, 44(879):1771-1774
[10]张江山, 鄂 蓓, 禹日成, 等. 高压下纳米尺寸Sr2FeMoO6粉末的结构稳定性和电学特性的研究.高压物理学报,2004, 18(3):193-196
[11]谈国太, 陈正豪, 章晓中(TAN Guo-Tai, et al). 钙钛矿锰氧化物La(1-x)TexMnO3(x=0.04,0.1)的两类磁电阻现象. 物理学报(Acta Physica Sinica), 2005, 1(54): 379-383.
[12]Valiev R Z, Islamgaliev R K, Alexandrov I V. Bulk nanostrucrured materials from severe plastic deformation.Progress in Materials Science,2000, 45(2):103-189
/
| 〈 |
|
〉 |
