Adv. Search
Journal of Inorganic Materials

Journal of Inorganic Materials >

2010 , Vol. 25 >Issue 3: 315 - 320

DOI: https://doi.org/10.3724/SP.J.1077.2010.00315

Research Paper

Effect of Heattreatment Temperature on Mechanical Properties of
Pyrocarbon and Carbon/Carbon Composites

  • YU Shou-uan ,
  • ZHANG Wei-Gang
Expand
  • 1. State Key Lab of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China; 2. Graduate University of the Chinese Academy of Sciences, Beijing 100049, China

Received date: 2009-06-25

  Revised date: 2009-10-21

  Online published: 2010-03-20

Fold

Abstract

Carbon/carbon composites were infiltrated by isobaric, isothermal chemical vapor infiltration using propane as the carbon source. Effects of heattreatment temperature up to 2500℃ on the microstructure and the mechanical properties of pyrocarbon and carbon/carbon composites were investigated by X-ay diffractometry, polarized light microscope, scanning electron microscope, nanoindentation, and three points bending tests. The microstructural investigations of samples reveal a pronounced decreased of the interlayer spacing with a simultaneous enhance of the graphitization degree, and polarized light microscope results exhibit distinct concentric cracks due to local stress induced graphitization, the number and width of cracks increase with the increase of heattreatment temperature. Nanoindentation carried out on the pyrocarbon shows the indentation behavior is purely elastic, but the curves of loading and unloading do not overlap with significant amount of energy dissipation, the elastic modulus of pyrocarbon increases with the increase of heat-reatment temperature. On the other hand, with the decrease of fiber strength and the debonding of fiber/matrix interface after heattreatment, the flexural strength and modulus of the carbon/carbon composites decrease.

Key words： carbon/carbon composites; heattreatment; mechanical properties

Cite this article

YU Shou-uan , ZHANG Wei-Gang . Effect of Heattreatment Temperature on Mechanical Properties of
Pyrocarbon and Carbon/Carbon Composites[J]. Journal of Inorganic Materials, 2010 , 25(3) : 315 -320 . DOI: 10.3724/SP.J.1077.2010.00315

References

［1］ Fitzer E. The future of carboncarbon composites. Carbon, 1987, 25 (2): 163-190.

［2］张伟刚. 化学气相沉积从烃类气体到热解炭.北京：科学出版社,2007: 272-273.

［3］于 澍, 刘根山, 李溪滨, 等（YU Shu, et al）.热处理温度对炭/炭复合材料性能的影响. 硅酸盐学报(Journal of the Chinese Ceramic Society), 2003, 31(9): 842-847

［4］赵建国, 李克智, 李贺军, 等. 热处理温度对炭/炭复合材料性能的影响.材料热处理学报, 2005, 26(1):1-5.

［5］Xu Guozhong, Li Hejun, Bai Ruicheng, et al. Influence of the matrix texture on the fracture behavior of 2D carbon/carbon composites. Materials Science and Engineering A, 2008, 478(1/2): 319-323.

［6］Guellali M, Oberacker R, Hoffmann M J. Influence of the matrix microstructure on the mechanical properties of CVI-infiltrated carbon fiber felts. Carbon, 2005; 43(9): 1954-1960.

［7］孙万昌, 李贺军, 白瑞成, 等(SUN Wan-hang, et al).微观组织结构对C/C复合材料力学行为的影响.无机材料学报(Journal of Inorganic Materials), 2005, 30(3): 671676.

［8］刘 皓, 李克智, 李贺军, 等(LIU Hao, et al). 微观结构对中间相沥青基炭/炭复合材料力学性能的影响.无机材料学报(Journal of Inorganic Materials), 2007, 22(5): 968972.

［9］陈腾飞, 龚伟平, 张洪波, 等. 高温热处理对光滑层热解碳裂纹形成的影响．粉末冶金材料科学与工程, 2006, 11(4): 210-213.

［10］Guellali M, Oberacker R, Hoffmann M J. Influence of heat-treatment on microstructure and properties of highly textured pyrocarbons deposited during CVD at about 1100℃ and above 2000℃. Composites Science and Technology, 2008, 68(5): 1115-1121.

［11］Diss P, Lamon J, Carpentier L, et al. Sharp indentation behavior of carbon/carbon composites and varieties of carbon. Carbon, 2002, 40(14): 2567-2579.

［12］Richter A, Ries R, Simth R, et al. Nanoindentation of diamond, graphite and fullerene films. Diamond and Related Materials, 2000, 9(2): 170-184.

［13］王浩静, 王红飞, 李东风, 等. 石墨化温度对炭纤维微观结构及其力学性能的影响．新型炭材料．2005, 20(2): 157-163.

Options
Outlines

/

〈 〉