0.3Pb(Ni1/3Nb2/3)O3-0.7Pb(Zr,Ti)O3 (PNN-PZT) thick films (10-40μm) were prepared by electrophoretic deposition method on Al2O3/Pt plates and Pt metallic foils. The effect of pH value on the stability of PNN-PZT suspensions was studied by measuring the zeta potential. The relationship among the deposition voltage, time and the quality of PNN-PZT films were investigated. When the pH value is in the range of 3.5-5.5, the suspension with the 2wt% PEG is stable. When the deposited voltage and time are 21V and 5min, respectively, the PNN-PZT thick films deposited on the Pt foil are uniform and free of crack. After sintering at 1200℃ for 30min, the PNN-PZT films with high density are obtained. The PNNPZT thick films show the high ferroelectric and dielectric properties with the remnant polarization of 20.8μC/cm2 and the loss tangent of about 3.2% at 1 kHz. And the frequency dependences of the dielectric spectra of the PNN-PZT thick films show the relaxor property. The piezoelectric constant calculated from the SV curve tested using the SPM is 67pm/V.
CAO Rui-Juan
,
LI Guo-Rong
,
ZHAO Su-Chuan
,
ZENG Jiang-Tao
,
ZHENG Liao-Ying
,
YIN Qing-Rui
. Electrophoretic Deposition and the Electrical Properties of the PNN-PZT Thick Films[J]. Journal of Inorganic Materials, 2009
, 24(6)
: 1183
-1188
.
DOI: 10.3724/SP.J.1077.2009.01183
[1]Harsanyi E. Method of Coating Radiant Bodies, U.S.Patent, No.1897902, 1933.
[2]Mayr H, Ordung M, Ziegler G. J. Mater. Sci., 2006, 41(24): 8138-8143.
[3]Wang Z, Shemilt J, Xiao P. J. Eur. Ceram. Soc., 2002, 22(2): 183-191.
[4]Limmer S J, Seraji S, Wu Y, et al. Adv. Func. Mater., 2002, 12(1): 59-64.
[5]Tassel V J, Randall C A. J. Eur. Ceram. Soc., 1999, 19(6/7): 955-958.
[6]Sarkar P, Nicholson S. J. Am. Ceram. Soc., 1996, 79(8): 1987-2002.
[7]Zhao J L, Wang X H, Li L T. Mater. Chem. Phys., 2006, 99(2/3): 350-353.
[8]Li T, Ma J, Chen Y H. Ceram. Inter., 2004, 30(7): 1803-1805.
[9]Chen Y H, Ma J, Li T. Ceram. Inter., 2004, 30(5): 683-687.
[10]Chen J, Fan H, Chen X, et al. J. Alloys Compd., 2009, 478(1/2): 853-857.
[11]Bamiere F, Benkert K, Radanielina M, et al. J. Eur. Ceram. Soc., 2007, 27(13): 3613-3617.
[12]Akiyama Y, Yamanaka K, AFujisawa E, et al. Jpn. J. Appl. Phys., 1999, 38(9B): 5524-5527.
[13]Ma J, Cheng W. Mater. Lett., 2002, 56(5): 721-727.
[14]Omer O, Biest V D, Vandeperre L. Annu. Rev. Mater. Sci., 1999, 29: 327-352.
[15]Holc J, Hrovat M, Kosec M. Mater. Res. Bull., 1999, 34(14/15): 2271-2278.
[16]Fan Huiqing, Kim HyounEe. J. Am. Ceram. Soc., 2001, 84(3): 636-638.
[17]Fan H J, Kuok M H, Ng S C, et al. J. Appl. Phys., 2002, 91(4): 2262-2266.
[18]Gentil S, Damjanovic D, Setter N. J. Electroceram., 2004, 12(3): 151-161.