Journal of Inorganic Materials >
Preparation and Catalytic Kinetic of Hydrophobic Photocatalytic Catalysts
(Key Laboratory of Three Gorges Reservoir Region’s Eco-environment, Ministry of Education, Chongqing University, Chongqing 400045, China)
Received date: 2009-02-27
Revised date: 2009-04-14
Online published: 2010-04-22
Sodium dodecyl sulfate (SDS) and copper oxide both were used to modify titanium dioxide photocatalytic catalysts. SDS was used to prepare hydrophobic titanium dioxide. Copper oxide was used to modify the visible light absorption capacity of titanium dioxide. FTIR, UV-Vis and 3-D fluorescence spectra methods were used to characterize the modified titanium dioxide photocatalytic catalysts. The modified titanium dioxide catalysts were used to treat nitrobenzene wastewater. Four factors including pH, initial nitrobenzene concentration, catalysts dosage and light intensity, were researched in a nitrobenzene degradation system that was treated under visible light. FTIR characterization shows that CC and CHfunctional groups appear on the surface of the catalysts. UV-Vis characterization shows that the catalysts modified by copper oxide have excellent visible light response capacity and their absorption edges reach or exceed 830nm. 3-D fluorescence spectra shows that holeelectrons are separated well after copper oxide and/or SDS is added. The speed of nitrobenzene degradationis fastest when pH is 9, the initial nitrobenzene concentration is 500mg/L, the catalyst dosage is 0.2g/L, and light intensity exceeds 2000μW/cm2. A kinetic model is established based on the results. The relative errors of the kinetic constants obtained by the model are between -16.5% and approximately -4.5% with low initial nitrobenzene concentrations, and between -11.3% and approximately 4.6% with high initial concentrations.
Key words: photocatalytic; hydrophobic; kinetic; nitrobenzene
HU Xue-Bin , XU Xuan , JI Fang-Ying , FAN Zi-Hong . Preparation and Catalytic Kinetic of Hydrophobic Photocatalytic Catalysts[J]. Journal of Inorganic Materials, 2009 , 24(6) : 1115 -1120 . DOI: 10.3724/SP.J.1077.2009.01115
[1]Hiromi Y, Masaru H, Junko M, et al. Catalysis Today, 2003, 84(3/4): 191-196.
[2]Maria J C, Irene C, Vittorio L, et al. Journal of Photochemistry and Photobiology A: Chemistry, 2007, 185(2/3): 277-282.
[3]Bo S, Ettireddy P R, Panagiotis G S. Journal of Catalysis, 2006, 237(2): 314-321.
[4]李梅金, 邱 彬, 郭光美, 等. 光谱学与光谱分析,2008, 28(6): 1364-1367.
[5]Mendez A F, Esplugas S, Gimenez J. Water Research, 2008, 42(3): 585-594.
[6]张耀君,张 莉(ZHANG Yao-Jun, et al).无机材料学报(Journal of Inorganic Materials), 2008, 23(1): 66-70.
[7]肖 义, 党利琴, 安丽珍, 等. 催化学报, 2008, 29(1): 31-36.
[8]陈 芳, 杨水金. 应用化工, 2005, 34(1): 9-12.
[9]Matthews R W. Chemistry and Industry (London), 1988,4(1): 28-30.
[10]石金娥, 闫吉昌, 尚淑霞, 等(SHI Jin-E, et al). 高等学校化学学报(Chemicl Journal of Chinese Universities), 2007, 28(7): 1325-1328.
[11]尤 宏, 吴东海, 姚 杰, 等. 安全与环境学报, 2008, 8(2): 16-19.
[12]陈芳艳, 陆 敏, 唐玉斌. 化学世界, 2008(4): 197-200.
[13]Linsebigler A L, Lu G Q, Yates J T. Chem. Rev., 1995, 95(3): 735-758.
[14]李旦振,郑 宜,付贤智.材料研究学报,2000,14(6): 639-642.
[15]梁爱惠, 陈媛媛, 蒋治良. 光谱学与光谱分析, 2006, 26(6): 1088-1091.
[16]Kim D H, Anderson M A. Envir. Sci. Technol., 1994, 28(3): 479-483.
/
〈 | 〉 |