Review

Development of Polymer-Derived SiC Fiber

  • ZHAO Da-Fang ,
  • WANG Hai-Zhe ,
  • LI Xiao-Dong
Expand
  • (1. Department of Space Equipment, the Academy of Equipment Command & Technology, Beijing 101416, China; 2. State Key Lab of Advanced Ceramic Fibers & Composites, National University of Defense Technology, Changsha 410073, China)

Received date: 2009-04-08

  Revised date: 2009-06-10

  Online published: 2010-04-22

Abstract

The polymer-derived SiC fiber is one of the most important reinforcing materials for high performance ceramic matrix composites (CMC). Three generations of SiC fibers have been developed over the past thirty years. In this article, the preparing methods, compositions, microstructures and performances of three-generation fibers are reviewed. Furthermore, the relationships are discussed between microstructure and the main properties of the fibers, such as high-temperature-resistance, modulus and creep resistance. And, as a summary, some improving methods for the properties of SiC fibers derived from precursor are summarized.

Cite this article

ZHAO Da-Fang , WANG Hai-Zhe , LI Xiao-Dong . Development of Polymer-Derived SiC Fiber[J]. Journal of Inorganic Materials, 2009 , 24(6) : 1097 -1104 . DOI: 10.3724/SP.J.1077.2009.01097

References

[1]Johnson D W, Evans A G, Goettler R W. Ceramic Fibers and Coatings: Advanced Materials for the Twentyfirst Century, Washington D. C: National Academy Press, 1998.
[2]Yajima S, hayashi J, Okamura K. Nature, 1977, 266: 521-522.
[3]Yajima S, Okamura K, Josaburo H, et al. J. Am. Ceram. Soc., 1976, 59(7/8): 324-427.
[4]Yajima S, Hasegawa Y, Hayashi J,et al. J. Mater. Sci., 1978, 13(12): 2569-2576.
[5]Okamura K. Composites, 1987, 18(2): 107-120.
[6]Bunsell A, Piant A. J. Mater. Sci., 2006, 41(3): 823-839.
[7]Okamura K, Toshio S. J. Ceram. Soc. Jpn., 2006, 114(6): 445-454.
[8]Havel M, Colomban P. Composites Part B: Engineering, 2004, 35(2): 139-147.
[9]Havel M, Colomban P. Compos. Sci. Technol., 2005, 65(3/4): 353-358.
[10]Ishikawa T. Compos. Sci. Technol., 1994, 51(2): 135-144.
[11]Yamamura T, Ishikawa T, Shibuya M,et al. J. Mater. Sci., 1988, 23(7): 2589-2594.
[12]Kumagawa K, Yamaoka H, Shibuya M,et al. Ceram. Eng. Sci. Proc., 1998, 19(3): 65-72.
[13]Gouadec G, Colomban P. J. Eur. Ceram. Soc., 2001, 21(9): 1249-1259.
[14]Suzuki K, Kumagawa K, Kamiyama T,et al. J. Mater. Sci.,2002, 37(5): 949-953.
[15]Yun H M, Dicarlo J A. Ceram. Eng. Sci. Proc., 1999, 20(3): 259-272.
[16]Simon G, Bunsell A R. J. Mater. Sci., 1984, 19(11): 3649-3657.
[17]Sawyer L C, Jamieson M, Brikowski D. J. Am. Ceram. Soc., 1987, 70(10): 798-810.
[18]Mah T, Hecht N L, Mccullum D E,et al. J. Mater. Sci., 1984, 19(4): 1191-1201.
[19]楚增勇.先驱体法碳化硅纤维缺陷形成机理与性能提高研究. 长沙:国防科技大学, 2003.
[20]Morishitaw K, Ochiai S, Okuda H,et al. J. Am. Ceram. Soc., 2006, 89(8): 2571-2576.
[21]Shimoo T, Okamura K, Morisada Y. J. Mater. Sci., 2002, 37(9): 1793-1800.
[22]Shimoo T, Morsada Y, Okamura K. J. Mater. Sci., 2002, 37(20): 4361-4368.
[23]Dicarlo J A. Compos. Sci. Technol., 1994, 51(2): 213-217.
[24]Ishikawa T, Kohtoku Y, Kumagawa K,et al. Nature, 1998, 391: 773-775.
[25]Le Coustumer P, Monthioux M, Oberlin A. J. Eur. Ceram. Soc., 1993, 11(2): 95-103.
[26]Laffon C, Flank A M, Lagarde P, et al. J. Mater. Sci., 1989, 24(4): 1503-1512.
[27]Porte L, Sartre A. J. Mater. Sci., 1989, 24(1): 271-275.
[28]Sugimoto M, Toshio S, Okamura K, et al. J. Am. Ceram. Soc., 1995, 78(4): 1013-1017.
[29]Shimoo T, Okamura K, Tsukada I,et al. J. Mater. Sci., 1999, 34(22): 5623-5631.
[30]Shimoo T, Okamura K, Takeuchi H. J. Mater. Sci., 2003, 38(24): 4973-4979.
[31]Clark T J, Prack E R, Haider M I, et al. Ceram. Eng. Sci. Proc., 1987, 8: 717-731.
[32]肖汉宁, 高朋召. 高性能结构陶瓷及其应用. 北京: 化学工业出版社, 2006.
[33]Hochet N, Berger M H, Bunsell A R. J. Microscoxford., 1997, 185: 243-258.
[34]Okamura K, Seguchi T. J. Inorg. Organomet. Poly., 1992, 2(1): 171-179.
[35]Hasegawa Y. Compos. Sci. Technol., 1994, 51(2): 161-166.
[36]Hasegawa Y. J. Inorg. Organometal. Poly., 1992, 2(1): 161-169.
[37]Toreki W, Batich C D, Sacks M D,et al. Compos. Sci. Technol., 1994, 51(2): 145-159.
[38]Yamaoka H, Ishikawa T, Kumagawa K. J. Mater. Sci., 1999, 34(6): 1333-1339.
[39]Berger M H, Hochet N, Bunsell A R. Ceramic. Eng. Sci. Proc., 1998, 19(3): 39-46.
[40]Chollon G, Pailler R, Naslain R, et al. J. Mater. Sci., 1997, 32(2): 327-347.
[41]Lipowitz J, Rabe J A, Zangvil A, et al. Ceram. Eng. Sci. Proc., 1997, 18(3): 147-157.
[42]Ichikawa H. Annales de Chimie Science des Matiaux, 2000, 25(7): 523-528.
[43]Sacks M D. J. Eur. Ceram. Soc., 1999, 19(13/14): 2305-2315.
[44]Cao F, Kim D P, Li X D,et al. J. Appl. Polym. Sci., 2002, 85(13): 2787-2792.
[45]Cao F, Li X D, Peng P,et al. J. Mater. Chem., 2002, 12: 606-610.
[46]Lipowitz J, Barnard T, Bujalski D,et al. Compos. Sci. Technol., 1994, 51(2): 167-171.
[47]Dong S M, Chollon G, Labrugére C, et al. J. Mater. Sci., 2001, 36(10): 2371-2381.
[48]Dicarlo J A, Yun H M. Handbook of Ceramic Composites. Boston: Kluwer, 2005.
[49]Dicarlo J A, Yun H M. SiC/SiC material development under the NASA UEET program, 2001.
[50]Tanaka T, Tamari N, Kondo I,et al. Ceram. Int., 1998, 24(5): 365-370.
[51]Dong S, Katoh Y, Kohyama A. J. Eur. Ceram. Soc., 2003, 23(8): 1223-1231.
[52]Araki H, Yang W, Suzuki H,et al. J. Nucl. Mater., 2004, 329-333(Part 1): 567571.
[53]Yan J Y, Chen C W, Fang P C,et al. J. Nucl. Mater., 2004, 329-333(Part 1): 513517.
[54]Yang W, Araki H, Kohyama A,et al. Ceram. Int., 2007, 33(2): 141-146.
[55]Jones R E, Petrak D, Rabe J,et al. J. Nucl. Mater., 2000, 283-287(Part 1): 556-559.
[56]Russell J D. High-Performance Synthesis Fibers for Composites. Washington DC: National Academy Press, 1992.
[57]Shigeto N. Ceramic Japan, 1999, 34(4): 58-62.
[58]Katoh Y, Kohyama A, Hinoki T. Fusion Sci. Technol., 2003, 44(1): 155-162.
[59]Cooke T F. J. Am. Ceram. Soc., 1991, 74(12): 2959-2978.
[60]Lewinsohn C A, Jones R H, Colombo P,et al. J. Nucl. Mater., 2002, 307311(Part 2): 1232-1236.
Outlines

/