Research Paper

Microstructure and Oxidation Behavior of the SiC/PyC Multilayer Coated Carbon Fibers

  • OUYANG Hai-Bo ,
  • LI He-Jun ,
  • QI Le-Hua ,
  • LI Zheng-Jia ,
  • WEI Jian-Feng
Expand
  • C/C Composites Research Center, Key Laboratory of Ultrahigh Temperature Composites, Northwestern Polytechnical University, Xi’an 710072, China

Received date: 2008-03-13

  Revised date: 2008-04-27

  Online published: 2009-01-20

Abstract

SiC/PyC coated carbon fibers were prepared by two-steps method. The PyC inner layer was prepared by isothermal chemical vapor infiltration and the SiC outer layer was synthesized by the carbothermal-reduction. The microstructures of the as-prepared SiC/PyC coated carbon fibers were characterized by XRD, FESEM and TEM. The oxidation behavior of the uncoated, PyC coated, and SiC/PyC coated carbon fibers were studied by the thermal-gravity analysis. The results show that the SiC and PyC layer deposited on carbon fibers are continuous and uniform. The thickness of PyC inner layer is about 200nm, and thickness of the SiC outer layer is about 160nm. High order twin boundaries are observed in the SiC layer. The oxidation resistance of the carbon fiber can be improved by the SiC/PyC multilayer coating. The initial oxidation temperature of the SiC/PyC coated carbon fiber is about 250℃ higher than that of uncoated carbon fiber.

Cite this article

OUYANG Hai-Bo , LI He-Jun , QI Le-Hua , LI Zheng-Jia , WEI Jian-Feng . Microstructure and Oxidation Behavior of the SiC/PyC Multilayer Coated Carbon Fibers
[J]. Journal of Inorganic Materials, 2009
, 24(1) : 103 -106 . DOI: 10.3724/SP.J.1077.2009.00103

References

[1]Chung D. Carbon Fiber Composites. Newton: Butterworth-Heinemann, 1994: 3-11. 
[2]Morgan P. Carbon Fibers and their Composites. London: Taylor & Francis. 2005: 791-849.
[3]Wang Y Q, Zhou B L, Wang Z M. Carbon, 1995, 33(4): 427-433.  [4] Piquero T, Vincent H, Vincent C, et al. Carbon, 1995, 33 (4): 455-467. 
[5]Kusakabe K, Sea B K, Hayashi J I, et al. Carbon, 1996, 34 (2): 179-185. 
[6]Dietrich D, Podlesak H, Marx G, et al. Fresenius J. Anal. Chem., 1998, 361(6-7): 568-569.
[7]王玉庆, 郑久红, 王作明, 等.金属学报, 1994, 30(4): B194-198. 
[8]高朋召, 王红洁, 金志浩 (Gao Peng-Zhao,et al). 无机材料学报 (Journal of Inorganic Materials), 2005, 20 (02): 323-331.
[9]Hackl G, Gerhard H, Popovska N. Thin Solid Films, 2006, 513(1-2): 217-222. 
[10]Lee Y J. Diamond and Related Materials, 2004, 13(3): 383-388. 
[11]华文君, 陈大明, 赵家培. 复合材料学报, 1999, 16(03): 73-77.
[12]Shimoo T, Okamura K, Akizuki T. Journal of Materials Science, 1995, 30(13): 3387-3394. 
[13]Kowbel W, Withers J C. Carbon, 1995, 33(4): 415-426. 
[14]Wang Y Q, Wang Z M, Zhou B L, et al. Journal of Materials Science Letters, 1993, 12(11): 817-818. 
[15]Wunder V, Popovska N, Wegner A, et al. Surface and Coating Technology, 1998, 100-101: 329-332. 
[16]徐国忠, 李贺军, 白瑞成, 等(XU Guo-Zhong, et al).无机材料学报(Journal of Inorganic Materials). 2006, 21 (6): 1385-1390.
[17]Hay R S, Welch J R, Cinibulk M K. Thin Solid Films, 1997, 308-309: 389-392.
[18]Yang W Y, Miao H Z, Xie Z P, et al. Chemical Physics Letters, 2004, 383(5-6): 441-444. 
[19]Wu Y J, Wu J S, Qin W, et al. Materials Letters, 2004, 58(17-18): 2295-2298. 
[20]Daulton T L, Bernatowicz T J, Lewis R S, et al. Geochimica et Cosmochimica Acta, 2003, 67(24): 4743-4767.
Outlines

/