Ordered mesoporous carbons were synthesized by using as-synthesized MCM-48 as the template and resorcinol (R)-formaldehyde sol as the carbon precursor. By changing the molar ratio of resorcinol (R) to template (w(R)/w(MCM-48)) and resorcinol (R) to water(w(R)/w(H2O)), mesoporous carbons with different porosities were produced. The obtained samples were characterized by N2 adsorption-desorption, X-ray diffraction, scanning electron microscopye, transmission electron microscopye and thermogravimetric analysis. It is found that the optimized w(R)/w(MCM-48) and w(R)/w(H2O) ratios are in the rang from 0.50 to 0.65 and from0.15 to 0.35, respectively, and the resulting ordered mesoporous carbons has BET specific surface areas greater than 1125m2/g, mean pore sizes from 2.2 to 2.4nm, and high thermal stability.
							
							
														
														
														
														
						 
					 	
										
					
						
						
							
																																		WANG Chong-Qing
																																				, 
																		SONG Jun
																																				, 
																		YAO Jian-Feng
																																				, 
																		LI Qing
																																				, 
																		ZHANG Li-Xiong
																																				, 
																		LIU Xiao-Qin
																																				, 
																		LU Xian-Cai
																																	. Synthesis of Ordered Mesoporous Carbons Using Resorcinol-Formaldehyde Sol as the Carbon Source and As-synthesized MCM-48 as the Template[J]. Journal of Inorganic Materials, 2009
																, 24(1)
																								: 23
																-28
																								. 
																 DOI: 10.3724/SP.J.1077.2009.00023
															
						 
					 
					
					
					 
					
										
										
										
					
										
										
										
										
						
						
							[1]Lee J, Han S J, Hyeon T. J. Mater. Chem., 2004, 14(4): 478-486. 
[2]Ryoo R, Joo S H, Jun S. J. Phys. Chem. B, 1999, 103 (37): 7743-7746. 
[3]Ryoo R, Joo S H, Kruk M. Adv. Mater., 2001, 13 (9): 677-681. 
[4]Joo S H, Jun S, Ryoo R. Micropor. Mesopor. Mater., 2001, 44-45: 153-158. 
[5]Kaneda M, Tsubakiyama T, Carlsson A, et al. J. Phys. Chem. B., 2002, 106 (6): 1256-1266. 
[6]黄 莉,王重庆,李 青,等. 林产业化学与工业, 2007, 27 (2): 57-61. 
[7]曾昌凤,李 青,王重庆,等. 林产业化学与工业, 2007, 27 (3): 87-92. 
[8]Lee J, Yoon S, Hyeon T, et al. Chem. Commun., 1999: 2177-2178. [9]Yoon S B, Kim J Y, Yu J S. Chem. Commun., 2001: 559-560. 
[10]Lee J, Yoon S, Oh S M, et al. Adv. Mater., 2000, 12 (5): 359-362. [11]Parmentier J, Saadhallah S, Reda M, et al. J. Phys. Chem. Solids., 2004, 65 (2-3): 139-146. 
[12]Anhui L, Kiefer A, Schmidt W, et al. Chem. Mater., 2004, 16 (1), 100-103. 
[13]Yoon S B, Kim J Y, Yu J S. Chem. Commun., 2002: 1536-1537. 
[14]蔡 强,张慧波,林文勇,等. 高等学校化学学报, 1999, 20 (5): 675-678. 
[15]王冬林,李 青,曾昌凤,等. 南京工业大学学报,2006, 28 (1): 89-92. 
[16]Lee K T, Oh S M. Chem. Commun., 2002: 2722-2733. 
[17]Tanaka S, Nishiyama N, Egashira Y, et al. Chem. Commun., 2005: 2125-2127. 
[18]Kim S, Pinnavaia T J. Chem. Commun., 2001: 2418-2419. 
[19]Sayari A. J. Am. Chem. Soc., 2002, 122 (22): 6504-6505.