A biodegradable silica-based xerogel with nano-scale mesopores was synthesized by using improved sol-gel process, and its hemostatic properties were investigated. The phase state, chemical structure, surface morphology, specific surface areas and mesoporous structure of the synthesized silica-based xerogels were measured systemically by means of X-ray diffraction (XRD), infrared spectrum (FTIR), transmission electron microscope (TEM), and N2 adsoption-desoption (BET) techniques, respectively. The effects of the silica-based xerogel on intrinsic and extrinsic blood clotting systems were examined through the activated partial thromboplastin time (APTT) and prothrombin time (PT) tests in ~vitro, respectively. The hemostatic performance of the prepared silica-based xerogel was evaluated at the rabbit’s ear side veins compared with a traditional hemostatic dressing (Yunnan Baiyao). The results reveal that the non-crystalline silica-based xerogel with 901.17m2/g specific surface areas and 3.255nm in apertures is obtained after calcining at 600℃. The silica-based xerogel facilitates both of the intrinsic and extrinsic clotting activities significantly. The silica-based xerogel has good hemostatic effect on the rabbit’s ear side veins which is better than that of the Yunnan Baiyao.
LI Xiao-Sheng
,
LIU Chang-Sheng
,
YUAN Yuan
,
WANG Li-Jun
,
WANG Qiu-Yun
. Preparation and Hemostatic Properties of Mesoporous Silica-based Xerogels[J]. Journal of Inorganic Materials, 2008
, 23(2)
: 327
-331
.
DOI: 10.3724/SP.J.1077.2008.00327
[1] Radin S, Ducheyne Paul, Kamplain T, et al. J. Biomed. Mater. Res., 2001, 57 (3): 313--320.
[2] Radin S, Falaizea S, Mark H L. Biomaterials, 2002, 23 (15): 3113--3122.
[3] Steven B. Nicoll, Radin Shulamith, Eric M. Santos, et al. Biomaterials, 1997, 18 (12): 853--859.
[4] Radin S, Ducheyne P, Rothman B, et al. J. Biomed. Mater. Res., 1997, 37 (3): 363--375.
[5] William L, Jonathan G, Paul D. Biomaterials, 2002, 23 (1): 213--217.
[6] Horn Jeffrey, Huey Raymond. Devices and methods for the delivery of molecular sieve materials for the formation of blood clots. US, Patent no WO2006086557. [7] 张晓凯, 陈晓峰, 王迎军, 等. 化学学报, 2005, 63 (22): 2077--2081.
[8] 杜瑞林, 常江, 倪似愚. 硅酸盐学报, 2005, 33 (5): 650--654.
[9] Duran A, Serna C, Fornes V, et al. J. Non-Cryst. Solids, 1986, 82 (1-3): 69--77.
[10] Einarsrud M A, Rormark L, Hareid S, et al. J. Non-Cryst. Solids, 1997, 211 (1-2): 49--55.
[11] DeBoer J. H. The structure and properties of porous materials. London: Butterworths, 1958. 68--70.
[12] 黄文来, 梁开明, 顾守仁(HAUNG Wen-Lai, et al). 无机材料学报(Journal of Inorganic Materials), 1999, 14 (2): 302--306.
[13] Zhang Kai, Yan Hongwei, David C Bell, et al. J. Biomed. Mater. Res., 2003, 66A (4): 860--869.
[14] Thomas H Fischer, Hemant S Thatte, Timothy C Nichols, et al. Biomaterials, 2005, 26 (27): 5433--5443.
[15] 钟吉品, 刘宣勇, 常江(ZHONG Ji-Ping, et al). 无机材料学报(Journal of Inorganic Materials), 2002, 17 (5): 897--907.
[16] Radin Shular, Gehan El-Bassyouni, Edward J Vresilovic, et al. Biomaterials, 2005, 26 (5): 1043--1052.