Adv. Search
Journal of Inorganic Materials

Journal of Inorganic Materials >

2008 , Vol. 23 >Issue 2: 257 - 261

DOI: https://doi.org/10.3724/SP.J.1077.2008.00257

Research Paper

Study of Preparation and Property of BZN Ceramic Ink

  • SHI Jian-Zhang ,
  • WANG Hong ,
  • Werner Jillek ,
  • YAO Xi
Expand
  • 1. Electronic Materials Research Laboratory, Xi’an Jiaotong University, Xi’an 710049, China; 2. School of Technical Physics, Xidian University, Xi’an 710071, China; 3. Electronic Package Laboratory, University of Applied
    Sciences, Nurnberg D90489, Germany

Received date: 2007-03-21

  Revised date: 2007-06-19

  Online published: 2008-03-20

Fold

Abstract

Preparation of Bi2O3-ZnO-Nb2O5(BZN) ceramic ink for Ink-Jet printing was studied with an aqueous, multifunctional organic solvent-sokalan PM70. The effects of different content of PM70 and the solid content BZN powder on the stability and viscosity of suspension liquid were discussed, and rather stable ink with high solid content was obtained. A planar capacitor was printed successfully with the prepared ink by the iP-210 Personal Plotter controlled by MD-E-201H. The influence of controlling parameters on the Ink-Jet printing was also dealt with. The thickness distribution of printed images was measured by Rodenstock RM600S. The experiment indicates that when the content of PM70 is 3.2wt％, the stability of ceramic ink is much more stable with the highest solid content of 48.8wt％. A better practical printing result will be obtained in the condition that drive voltage is 10V, the pulse width is 1.5 and the pulse period is about 800μ s.

Key words： Ink-Jet printing; sokalan PM70; aqueous ceramic ink; BZN microwave ceramic

Cite this article

SHI Jian-Zhang , WANG Hong , Werner Jillek , YAO Xi . Study of Preparation and Property of BZN Ceramic Ink[J]. Journal of Inorganic Materials, 2008 , 23(2) : 257 -261 . DOI: 10.3724/SP.J.1077.2008.00257

References

[1] Sawyer B. Fuller, et al. Journal of Microelectromechanical Systems, 2002, 11 (1): 54--60.
[2] Bieri N R, et al. Applied Physics Letters, 2003, 82 (20): 3529--3531.
[3] 郭瑞松, 齐海涛, 陈玉如(GUO Rui-Song, et al). 无机材料
学报(Journal of Inorganic Materials), 2003, 18 (3): 645--652.
[4] Yi Liu, et al, Solid-State Electronics, 2003, 47 (9): 1543--1548.
[5] 郭瑞松, 齐海涛, 李金有(GUO Rui-Song, et al). 无机材料
学报(Journal of Inorganic Materials), 2003, 18 (4): 955--959.
[6] David Redinger, et al. IEEE Trans. on Electron Devices, 2004, 51 (12): 1978--1983.
[7] Remi Noguera, et al. Journal of the European Ceramic Society, 2005, 25 (12): 2055--2059.
[8] Tae Y. Choi, et al. Applied Physics Letters, 2004, 85 (1): 13--15.
[9] Dong Heon Lee, et al. Journal of the European Ceramic Society, 2004, 24 (6): 1069--1072.
[10] Jaewon Chung, et al. Transaction of ASME, 2005, 127 (6): 724--730.
Options
Outlines

/

〈 〉