Research Paper

Effect of Bi2O3 on Properties of Lithium-Zinc Ferrite

  • YU Zhong ,
  • CHEN Dai-Zhong ,
  • LAN Zhong-Wen ,
  • JIANG Xiao-Na ,
  • LIU Bao-Yuan
Expand
  • State Key Lab of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu 610054, China

Received date: 2006-10-18

  Revised date: 2006-12-12

  Online published: 2007-11-20

Abstract

The lithium-zinc ferrite doped with Bi2O3 was prepared by the conventional oxide ceramic process. The effect of Bi2O3 on properties of lithium-zinc ferrite was investigated by means of characterizing the phase component and fracture surface micrograph by X-ray diffraction (XRD) and scanning electron microscope (SEM), density by Archimedean method, and magnetic properties by B-H analyzer. The results show that Bi2O3 can effectively bate the volatilization of lithium, promote solid state reaction and decrease the sintering temperature, but excessive Bi2O3 can restrain the crystal grain growth during sintering process. An optimal amount of Bi2O3 is beneficial to increase the saturation magnetic induction Bs and squareness Br/Bs, and decrease the coercive force Hc of lithium-zinc ferrite.

Cite this article

YU Zhong , CHEN Dai-Zhong , LAN Zhong-Wen , JIANG Xiao-Na , LIU Bao-Yuan . Effect of Bi2O3 on Properties of Lithium-Zinc Ferrite[J]. Journal of Inorganic Materials, 2007 , 22(6) : 1173 -1177 . DOI: 10.3724/SP.J.1077.2007.01173

References

[1] 潘永吉. 磁性材料及器件, 1999, 30 (6): 22--30.
[2] 韩志全. 磁性材料及器件, 2000, 31 (5): 32--35.
[3] 扬永山, 史兴宽, 胡雪梅,等. 航天工艺, 2000, (5): 1--5.
[4] Nakamura T, Miyamoto T. Permeability Spectra of Low-Temperature Sintered Li-Zn-Cu Ferrite. Proceeding of 9th International Conference of Ferrite, San Francisco, 2004. 197--202.
[5] Chen S H, Chang S C, Ysay C Y, et al. J. Euro. Ceram. Soci., 2001, 21: 1931--1935.
[6] 余忠, 兰中文, 王京梅. 材料研究学报, 2004, 18 (2): 176--180.
[7] 周济, 梁彬. 高技术通讯, 1998, 8 (4): 39--42.
[8] Mamata, Maisnam, Sumitra, et al. Physica B, 2004, (352): 86--90.
[9] Ono K, Fukunanga S, Matsuo Y. IEEE Trans. on Magn., 1999, 35 (5): 3406--3408.
[10] Andrei P, Caltun O F. J. Magn. Magn. Mater., 1999, 196-197: 362--364.
[11] Seafue W, Yuhruey W, Thomas C K, et al. J. Magn. Magn. Mater., 2000, 220: 129--138.
[12] Laishram Radhapiyari, Sumitra Phanjoubam. Materials Letters, 2000, (44): 65--69.
[13] Nutan Gupta, Mukesh C, Dimri, et al. Ceramics International, 2005, 31: 171--176.
Outlines

/