Adv. Search
Journal of Inorganic Materials

Journal of Inorganic Materials >

2009 , Vol. 24 >Issue 5: 1008 - 1012

DOI: https://doi.org/10.3724/SP.J.1077.2009.01008

Research Paper

Preparation and Thermal Sensitive Characteristics of the
Co0.8Mn0.8Ni0.9Fe0.5O4 Nanometer Powders

  • ZHANG Dong-Yan ,
  • ZHANG Hui-Min ,
  • JIN Xian-Jing ,
  • CHANG Ai-Min
Expand
  • (1. Xinjiang Technical Institute of physics and Chemistry, Chinese Academy of Sciences, Urumqi 830011, China; 2. Graduate University of the Chinese Academy of Sciences, Beijing 100049, China)

Received date: 2008-12-10

  Revised date: 2009-02-18

  Online published: 2009-09-20

Fold

Abstract

Nano-powders of Co0.8Mn0.8Ni0.9Fe0.5O4 NTC (Negative Temperature Coefficient) thermistor materials were prepared by co-precipitation method with NH4HCO3 as precipitator. The effects of calcination temperature on the material phase were studied. The influences of different sintering processes on the microstructure and thermal sensitive characteristics of NTC thermistor materials were investigated. The samples were characterized by XRD, TG/DTA, FT-IR, SEM, and Laser Particle Size Analyzer. The results show that the powders calcined at 750℃ are single spinel, the grain size of the powders is about 32.1nm, and the particle size is about 50-100nm. The samples possess better electrical properties: ρ25℃=1183Ω·cm, B25/50=3034K under the process conditions of constant temperature 840℃ and 1200℃ for 2h respectively, the heating and cooling rate of 1℃/min. It is found that proper sintering process can effectively improve the microstructure and thermal sensitive properties of the NTC thermistor materials. According to the calculation from the slope of lnρ-1/T curves, the activation energy is about 0.26eV.

Key words： NTC thermistor; nano-powders; co-precipitation; resisitivity

Cite this article

ZHANG Dong-Yan , ZHANG Hui-Min , JIN Xian-Jing , CHANG Ai-Min . Preparation and Thermal Sensitive Characteristics of the
Co0.8Mn0.8Ni0.9Fe0.5O4 Nanometer Powders[J]. Journal of Inorganic Materials, 2009 , 24(5) : 1008 -1012 . DOI: 10.3724/SP.J.1077.2009.01008

References

［1］Wang Z B, Zhao C H, Yang P H, et al. Journal of the European Ceramic Society, 2006, 26(13):2833-2837.
［2］Metz R. Journal of Materials Science, 2000, 35(18):4705-4711.
［3］Saha D, Das Sharma A, Sen A, et al. Materials Letters, 2002, 55(6):403-406.
［4］Guillemet-Fritsch S, Salmi J, Sarrias J, et al. Materials Research Bulletin, 2004, 39(12):1957-1965.
［5］王恩信, 荆玉兰, 王鹏程, 等. 电子元件与材料, 1997, 16(4):1-9.
［6］贡长生, 张克立. 新型功能材料. 北京: 化学工业出版社, 2001, 1:132-136.
［7］Park K, Bang D Y. Journal of Material Science, 2003, 14(2):81-87.
［8］Kanade S A, Puri V. Materials Research Bulletin, 2008, 43(4):819-824.
［9］王卫民. Mn-Co-Ni-O基NTC热敏半导体陶瓷的低温烧结与电性能研究. 西安：西北工业大学博士论文, 2007.
［10］李言荣, 恽正中. 电子材料导论. 北京: 清华大学出版社, 2001: 384-388.
［11］Buchanan R C. Ceramic Materials for Electronics, 3rd ED. Boca Raton:CRC press Inc.,2004: 323-430.
［12］纪士东, 王春玲. 电子元件与材料, 2005, 24(1):13-15.
［13］郑翠红, 汪 洋. 化工时刊, 2004, 1(18):31-33.
［14］Kanade S A, Puri V. Materials Letters, 2006, 60(11):1428-1431.
［15］蔡之让, 童 伟, 张 贝, 等(CAI Zhi-Rang, et al). 无机材料学报(Journal of Inorganic Materials),2008, 1(23):8-12
［16］Park K, Han I H. Journal of Electroceramics 2006, 17(2/3/4):1079-1082.
［17］Kanade S A, Puri V. Journal of Alloys Compounds, 2009, 475(1/2):352-355.
Options
Outlines

/

〈 〉