Research Paper

Preparation of Calcium Phosphate Cement Tissue Engineering Scaffold Reinforced with Chitin Fiber

  • DONG Hao ,
  • YE Jian-Dong ,
  • WANG Xiu-Peng ,
  • YANG Juan-Juan
Expand
  • Key Laboratory of Specially Functional Materials, South China University of Technology, Ministry of Education, ; School of Materials Science and Engineering, South China University of Technology,Guangzhou 510640, China

Received date: 2006-10-07

  Revised date: 2006-11-20

  Online published: 2007-09-20

Abstract

Macroporous calcium phosphate cement (CPC) scaffold was prepared by a salt-leaching method using water-dissoluble rod-shaped monosodium glutamate crystals as poregen. The relationship between the porosity and the amount of poregen was investigated. The results indicate that the porosity of CPC scaffold come up to (79.8±2.3)% with a pore size range of 100--600μm. Chitin fibers was incorporated to reinforce CPC scaffold. The compressive strength of the Chitin fibers reinforced CPC scaffold increases 3 to 4 times higher than that of the CPC scaffold without fibers and the strain of fracture increases remarkably. The scaffold material may be applied in the bone tissue engineering for repair of non-load bearing bone defects.

Cite this article

DONG Hao , YE Jian-Dong , WANG Xiu-Peng , YANG Juan-Juan . Preparation of Calcium Phosphate Cement Tissue Engineering Scaffold Reinforced with Chitin Fiber[J]. Journal of Inorganic Materials, 2007 , 22(5) : 1007 -1010 . DOI: 10.3724/SP.J.1077.2007.01007

References

[1] Takagi S, Chow L C. Journal of Materials Science : Materials in Medicine, 2001, 12: 135--139.
[2] Xu H H K, Takagi S, Quinn J B, et al. J. Biomed. Mater. Res., 2004, 68A: 725--734.
[3] 张利, 李玉宝, 周钢, 等(ZHANG Li, et al). 无机材料学报(Journal of Inorganic Materials), 2006, 21 (5): 1197--1202.
[4] Xu H H K, Eichmiller F C, Giuseppetti A A. J. Biomed. Mater. Res., 2000, 52: 107--114.
[5] Khairoun I, Driessens F C M, Boltong M G, et al. Biomaterials, 1999, 20: 393--398.
[6] Wei G, Ma P X. Biomaterials, 2004, 25: 4749--4757.
[7] Bovan B D, Hummert T W, Dean D D, et al. Biomaterials, 1996, 17: 137--146.
[8] Wang X P, Ye J D, Chen L, et al. Key Engineering Materials, 2007, 330-332: 983--986.
[9] 董浩, 叶建东, 王秀鹏. 功能材料, 2006, 37 (11): 1805--1809.
[10] 魏杰, 刘昌胜, 洪华, 等(WEI Jie, et al). 无机材料学报(Journal of Inorganic Materials), 2006, 21 (4): 958--964.
[11]肖长发.纤维复合材料-纤维、基体、力学性能. 第一版. 北京: 中国石化出版社. 1991. 6--14.
[12] 顾震隆. 短纤维复合材料力学. 第一版. 北京: 国防工业出版社. 1987. 163--172.
Outlines

/