[1] Veprek S, Reiprich S. Thin Solid Films, 1995, 268: 64--71
[2] Sung C M, Sung M. Mat. Chem. Phys., 1996, 43: 1--18
[3] Liu A Y, Cohen M L. Phys. Rev. B, 1990, 41: 10727--10734
[4] Gilman J J. MRS Conf. Proc., 1995, 282: 281--288
[5] Teter D M. MRS Bulletin, 1998, 1: 22--27
[6] Sjostrom H, Hultman L, Sundgren J E, et al. J. Vac. Sci. Technol. A, 1996, 14: 56--62
[7] Ulrich S, Theel T, Schwan J, et al. Surf. coat. Technol., 1997, 97: 45--59
[8] Tateyama Y, Ogitsa T, Kasakabe K, et al. Phys. Rev. B, 1997, 55: R10161--R10164
[9] Weber A, Bringmann U, Nikulski R, et al. Diamand and Related Materials, 1993, 2: 201--208
[10] Dekempeneer E H A, Meneve J, Smeets J, et al. Surf. Coat. Technol., 1994, 68/69: 621--625
[11] Badzian A, Badzian T. Int. J. of Refractory Metal & Hard Materials, 1997, 15: 3--12
[12] Veprek S. Thin Solid Films, 1998, 317: 449--454
[13] Schlesinger T E, Cammarata R R. Mat. Res. Soc. Symp. Proc., 1990, 188: 295--301
[14] Cammarata R C. Thin Solid Films, 1994, 240: 82--87
[15] Chu X, Barnett S A. J. Appl. Phys., 1995, 77 (8): 4403--4411
[16] Holleck H, Schier V. Surfa. Coat. Technol., 1995, 76/77: 328--336
[17] Sundgren J E, Hul;tman L. In: Pauleau Y, ed. Materials and Processes for Surface and Interface Engineering. Netherland: Klawer Academic Publishers, 1995. 453--474
[18] Sproul W D. Surf. Coat. Technol., 1996, 81: 1--7
[19] Sproul W D. Science, , 1996, 273: 889--892
[20] Santhanam, A T, Quinto D T, et al. Surface Engineering, 1994, 5: 903--905
[21] Li D, Lin X W, cheng S H. Appl. Phys. Lett., 1996, 68: 1211--1213
[22] Wu M L, Qian W D, Chung Y W, et al. Thin solid Films, 1977, 308/309: 113--117 |
