高级检索
无机材料学报

无机材料学报 >

2009 , Vol. 24 >Issue 3: 617 - 622

DOI: https://doi.org/10.3724/SP.J.1077.2009.00617

研究论文

双层陶瓷膜共烧结制备过程中的应力分析

  • 邱鸣慧 ,
  • 冯 君 ,
  • 范益群 ,
  • 徐南平
展开
  • 南京工业大学 化学化工学院 材料化学工程国家重点实验室， 南京 210009

收稿日期: 2008-08-19

  修回日期: 2008-10-16

  网络出版日期: 2009-05-20

收起

Stress Analysis in the Preparation of Bi-layer Membranes by Co-sintering Process

  • QIU Ming-Hui ,
  • FENG Jun ,
  • FAN Yi-Qun ,
  • XU Nan-Ping
Expand
  • State Key Laboratory of MaterialsOriented Chemical Engineering, College of Chemistry and Chemical Engineering, Nanjing University of Technology, Nanjing 210009, China

Received date: 2008-08-19

  Revised date: 2008-10-16

  Online published: 2009-05-20

Fold

摘要

依据“受限烧结”理论，分析计算刚性支撑体上单层陶瓷膜在烧结过程中受到的应力.结果表明：单层膜在受限烧结过程中受到来自支撑体的拉应力作用，导致烧结推动力较自由烧结时降低，所需要的烧结温度比无支撑材料的烧结温度高.对于α-Al2O3单层膜和ZrO2单层膜，分别计算其在受限烧结过程中受到的推动力，通过与膜层强度相关联，确定各自合适的烧结温度分别为1350和1180℃.进一步采用层状材料的共烧结应力模型计算双层膜在共烧结过程中顶层ZrO2膜对底层α-Al2O3膜的压应力，当底层α-Al2O3膜的厚度为15μm时，顶层ZrO2膜厚度需大于10μm，压应力的促进作用才能实现ZrO2/α-Al2O3双层膜在1200℃下共烧结.

关键词： 陶瓷膜; 受限烧结; 共烧结; 烧结应力

本文引用格式

邱鸣慧 , 冯 君 , 范益群 , 徐南平 . 双层陶瓷膜共烧结制备过程中的应力分析[J]. 无机材料学报, 2009 , 24(3) : 617 -622 . DOI: 10.3724/SP.J.1077.2009.00617

Abstract

Based on the theory of “constrained sintering”, stress of the membrane exerted by a rigid substrate was calculated. Results show that the tensile stress from supports can decrease driving force and consequently increase the sintering temperature of supported membranes. The optimal sintering temperatures, 1350℃ and 1180℃ for α-Al2O3 and ZrO2 supported membranes respectively, are determined by combining membrane strength and sintering driving force. Meanwhile, a method is proposed to calculate the stress developed in the co-sintering process of the supported multilayer membrane. For ZrO2/α-Al2O3 bi-layer membrane, the calculated results show that due to the contribution of the compressive stress, the sintering driving force increases and the α-Al2O3 membranes can be sintered effectively after co-sintering at 1200℃. Moreover, the top-layer ZrO2 membrane should be thicker than 10μm so as to exert sufficient compressive stress on the sub-layer α-Al2O3 membrane with thickness of 15μm.

Key words： ceramic membrane; constrained sintering; co-sintering; sintering stress

参考文献

［1］Levnen E, Mntyl T A. Journal of the European Ceramic Society, 2002, 22(5):613-623.
［2］Lindqvist K, Liden E. Journal of the European Ceramic Society, 1997, 17(2-3):359-366.
［3］Chang Xianfeng, Zhang Chun, Jin Wanqing, et al. Journal of Membrane Science, 2006, 285(1-2):232-238.
［4］Feng Jun, Fan Yiqun, Qi Hong, et al. J. Membrane Science, 2007, 288(1-2):20-27.
［5］Scherer G W, Garino T. Journal of the American Ceramic Society, 1985, 68(4):216-220.
［6］Garino T J, Bowen H K. Journal of the American Ceramic Society, 1990, 73(2):251-257.
［7］Huang C C, Jean J H. Journal of the American Ceramic Society, 2004, 87(8):1454-1458.
［8］Mohanram A, Lee S H, Messing G L, et al. Journal of the American Ceramic Society, 2006, 89(6):1923-1929.
［9］Lin Y C, Jean J H. Journal of the American Ceramic Society, 2004，87(2): 187-191.
［10］Guillon O, Aulbach E, Rdel J, et al. Journal of the American Ceramic Society, 2007, 90(6):1733-1737.
［11］梁彤翔, 朱钧国, 杨 冰. 硅酸盐学报, 1998, 26(3): 286-291.
［12］Cai P Z, Green D J, Messing G L. Journal of the American Ceramic Society, 1997, 80(8):1929-1939.
［13］Bordia R K, Scherer G W. Acta Metall., 1988, 36(9):2393-2397.
［14］Bordia R K, Scherer G W. Acta Metall., 1988, 36(9):2411-2416.
［15］Bordia R K, Raj R. Journal of the American Ceramic Society, 1985, 68(6):287-293.
［16］冯 君. 多孔陶瓷膜的共烧结制备技术研究.南京: 南京工业大学博士论文, 2007.
［17］Suresh S, Giannakopoulos A E, Olsson M. Journal of the Mechanics and Physics of Solids, 1994, 42(6):979-1018.
［18］Ravi D, Green D J. Journal of the European Ceramic Society, 2005, 26(1-2):17-25.
［19］Cai P Z, Green D J, Messing G L. Journal of the American Ceramic Society, 1997, 80(8):1940-1948.
Options
文章导航

/

〈 〉