高级检索
无机材料学报

无机材料学报 >

2009 , Vol. 24 >Issue 6: 1090 - 1096

DOI: https://doi.org/10.3724/SP.J.1077.2009.01090

综述

无机材料喷墨制备新方法的进展

  • 王 卓 ,
  • 李永祥 ,
  • 杨群保
展开
  • （1. 中国科学院 上海硅酸盐研究所 高性能陶瓷和超微结构国家重点实验室, 上海 200050; 2.中国科学院 研究生院, 北京 100049）

收稿日期: 2008-12-31

  修回日期: 2009-03-23

  网络出版日期: 2010-04-22

收起

Progress of Novel Inkjet Technique for Inorganic Materials Preparation

  • WANG Zhuo ,
  • LI Yong-Xiang ,
  • YANG Qun-Bao
Expand
  • (1. State Key Lab of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China; 2.Graduate University of the Chinese Academy of Sciences, Beijing 100049, China)

Received date: 2008-12-31

  Revised date: 2009-03-23

  Online published: 2010-04-22

Fold

摘要

近年来, 喷墨制备技术被用于无机材料复杂三维结构无模成型和材料芯片的制备中, 受到了国内外研究人员的广泛关注. 本文综述了喷墨制备技术在无机材料多个方面的研究进展, 包括不同驱动模式的喷墨设备选择, 材料墨水的性能、无机材料复杂结构和材料芯片喷墨制备过程中存在的问题以及目前研究的热点问题等. 并介绍了作者在喷墨制备应用研究方面的进展, 包括电极制作和制备材料芯片用电磁式喷墨打印设备的建立.

关键词： 喷墨制备; 陶瓷墨水; 导电线路; 材料芯片; 墨水干燥

本文引用格式

王 卓 , 李永祥 , 杨群保 . 无机材料喷墨制备新方法的进展[J]. 无机材料学报, 2009 , 24(6) : 1090 -1096 . DOI: 10.3724/SP.J.1077.2009.01090

Abstract

In the last few years, inkjet technique has attracted great attention for its use as a form-free fabrication method for building 3-D structure of inorganic materials and combinatorial material chips. This article reviews the progress of inorganic materials prepared by inkjet technique, including the development of inkjet printing system, the properties of different ink, applications, challenges and the hot of recent research. The fabrication of conducting circuits and setup of an electromagnetic inkjet fabricating system for material chip preparation in author’s lab is briefly introduced as well.

Key words： inkjet fabricating; ceramic ink; conducting circuits; material chip; ink drying

参考文献

［1］Calvert P. Chem. Mater., 2001, 13: 3299-3305.
［2］Wright M J, Evans J R G. Journal of Materials Science Letters, 1999, 18: 99-101.
［3］Derby B, Reis N. MRS Bulletin, 2003, 28(11): 815-818.
［4］de Gans BJ, Duineveld P C, Schubert U S. Adv. Mater., 2004, 16(3): 202-213.
［5］Blazdell P F, Evans J R G, Edirisinghe M J, et al. Journal of Materials Science Letters, 1995, 14(22): 1562-1565.
［6］Slade C E, Evans J R G. Journal of Materials Science Letters, 1998,17(19): 1669-1671.
［7］Cappi B, Ozkol E, Ebert J, et al. Journal of the European Ceramic Society, 2008, 28(13): 2625-2628.
［8］Mott M, Song J H, Evans J R G. J. Am. Ceram. Soc., 1999, 82(7): 1653-1658.
［9］Mott M, Evans J R G. Materials Science and Engineering A, 1999, 271: 344-352.
［10］Zhao X L, Evans J R G, Edirisinghe M J, et al. J. Am. Ceram. Soc., 2002, 85(8): 2113-2115.
［11］Windle J, Derby B. Journal of Materials Science Letters, 1999, 18(2): 87-90.
［12］Lee D H, Derby B. Journal of the European Ceramic Society, 2004, 24(6): 1069-1072.
［13］Bhatti A R, Mott M, Evans J R G, et al. Journal of Materials Science Letters, 2001, 20(13): 1245-1248.
［14］Noguera R, Lejeine M, Chartier T. Journal of the European Ceramic Society, 2005, 25(12): 2055-2059.
［15］Kaydanova T, Miedaner A, Perkins J D, et al. Thin Solid Films, 2007, 515(7/8): 3820-3824.
［16］Cheong M H, Wagner S. IEEE Electron Device Lett., 2000, 21(8): 384-386.
［17］Rozenberg G G, Bresler E, Speakman S P, et al. Applied Physics Letters, 2002, 81(27): 5249-5251.
［18］Lee H H, Chou K S, Huang K C. Nanotechnology, 2005,16(10): 2436-2441.
［19］Lee K J, Jun B H, Kim T H, et al. Nanotechnology, 2006, 17(9): 2424-2428.
［20］Liu Z C, Su Y, Varahramyan K. Thin Solid Film, 2005, 478(1/2): 275-279.
［21］Xue F L, Liu Z C, Su Y, et al. Micrelectronic Engineering, 2006, 83(2): 298-302.
［22］李永祥, 王 卓, 朱南飞, 等. 一种导电线路的制作方法, 中国发明专利, CN101227796A,2008.07.23.
［23］Wang J W, Shaw L L. J. Am. Ceram. Soc., 2006, 89(10): 3285-3289.
［24］李永祥,王 卓, 王 东. 制备组合材料芯片的方法及所使用的电磁喷射系统, 中国发明专利, CN101342525A,2009.01.14.
［25］Mougenot M, Lejeune M, Baumard J F, et al. J. Am. Ceram. Soc., 2006, 89(6): 1876-1882.
［26］Lee K M, Duchamp M, Kulik G, et al. Applied Physics Letters, 2007, 91: 173112-1-3.
［27］Kordas K, Mustonen T, Tóth G, et al. Small, 2006, 2(8/9): 1021-1025.
［28］Small W R, Masdarolomoor F, Wallace G G, et al. Journal of Materials Chemistry, 2007, 17: 4359-4361.
［29］Tekin E, Smith P J, Schubert U S. Soft Matter., 2008, 4(4): 703-713.
［30］de Gans B-J, Kazancioglu E, Meyer W, et al. Macromol. Rapid Commun., 2004, 25(1): 292-296.
［31］Sele C W, Von werne T, Friend R H, et al. Adv. Mater., 2005, 17(8): 997-1001.
［32］Wang J, Evans J R G. Physical Review E, 2006, 73(2): 021501-1-8.
［33］Zhang Y, Chen L F, Evans J R G. J. Am. Ceram. Soc., 2006, 89(12): 3858-3860.
［34］Deegan R D, Bakajin O, Dupont T F, et al. Nature (London), 1997, 389(23): 827-829.
［35］Park J H, Moon J H. Langmuir, 2006, 22(8): 3506-3513.
［36］Zhang Y, Yang S, Chen L, et al. Langmuir, 2008, 24(8): 3752-3758.
［37］Ko H, Park J, Shin H, et al. Chem. Mater., 2004, 16(22): 4212-4215.
［38］Smith P J, Shin D Y, Stringer J E, et al. J. Mater. Sci., 2006, 41(13): 4153-4158.
［39］Van den Berg A M J, de Laat A W M, Smith P J, et al. J. Mater. Chem., 2007, 17: 677-683.
［40］Duineveld P C. J. Fluid Mech., 2003, 477: 175-200.
Options
文章导航

/

〈 〉