高级检索
无机材料学报

无机材料学报 >

2007 , Vol. 22 >Issue 4: 637 - 641

DOI: https://doi.org/10.3724/SP.J.1077.2007.00637

研究论文

超声喷雾热分解制备锂离子电池正极材料 LiNi1/3Co1/3Mn1/3O2 及表征

  • 刘智敏 ,
  • 胡国荣 ,
  • 方正升 ,
  • 张新龙 ,
  • 刘业翔
展开
  • 中南大学冶金科学与工程学院, 长沙 410083

收稿日期: 2006-07-14

  修回日期: 2006-10-11

  网络出版日期: 2007-07-20

收起

Synthesis and Characterization of LiNi1/3Co1/3Mn1/3O2 as a Cathode Material for Lithium Batteries by Ultrasonic Spray Pyrolysis

  • LIU Zhi-Min ,
  • HU Guo-Rong ,
  • FANG Zheng-Sheng ,
  • ZHANG Xin-Long ,
  • LIU Ye-Xiang
Expand
  • School of Metallurgical Science and Engineering, Central South University, Changsha 410083, China

Received date: 2006-07-14

  Revised date: 2006-10-11

  Online published: 2007-07-20

Fold

摘要

采用超声喷雾热分解工艺合成了球形锂离子电池正极材料LiNi1/3Co1/3Mn1/3O2. 考察了不同前驱溶液对粉体形貌的影响, 用喷雾热分解过程机理分析了形貌差异的原因, 另外研究了不同的后处理烧结时间对样品电化学性能的影响. 试验结果表明, 采用硝酸盐溶液经喷雾热分解制备的前驱体在900℃烧结6h可以得到电化学性能优良的正极材料, 在3.0～4.3V电压区间里, 首次放电容量达157.7mAh/g, 40次循环后容量仍保持146.6 mAh·g-1.

关键词： 锂离子电池; 超声喷雾热分解; LiNi1/3Co1/3Mn1/3O2

本文引用格式

刘智敏 , 胡国荣 , 方正升 , 张新龙 , 刘业翔 . 超声喷雾热分解制备锂离子电池正极材料 LiNi1/3Co1/3Mn1/3O2 及表征[J]. 无机材料学报, 2007 , 22(4) : 637 -641 . DOI: 10.3724/SP.J.1077.2007.00637

Abstract

Spherical morphology LiNi1/3Co1/3Mn1/3O2 as a cathode aterial of lithium ion batteries was successfully synthesized by an ultrasonic spray pyrolysis method. The effects of different precursor solution on the morphology of particles were investigated. The reasons of morphology difference were analysed by using the process mechanism of spray pyrolysis. In addition, the impacts of various post reatment sintering time on electrochemical performances of the samples were characterized. Experimental results show that the cathode material synthesized by ultrasonic spray pyrolysis using nitrate as precursor solution, followed by sintering at 900℃ for 6h, exhibits excellent electrochemical properties. In the voltage range of 3.0--4.3V, initial discharge capacity of the sample is 157.7mAh · g-1 and its capacity retains 146.6mAh·g-1 after 40 cycles.

Key words： lithium-ion battery; ultrasonic spray pyrolysis; LiNi1/3Co1/3Mn1/3O2

参考文献

[1] Ohzuku T, Makimura Y. Chem. Lett., 2001, 7: 642--643.
[2] Shaju K M, Subba Rao G V, Chowdari B V R. Electrochim. Acta, 2002, 48: 145--151.
[3] Luo X F, Wang X Y, Liao L. J. Power Source, 2006, 158: 654--658.
[4] Cho T H, Park S M, Yoshio M. J. Power Source, 2005, 142: 306--312.
[5] Chen Y, Wang G X, Konstantinov K, et al. J. Power Source, 2003, 119-121: 184--188.
[6] Lee M H, Kang Y J, Myung S T, et al. Electrochimica Acta, 2004, 50: 939--948. [7] 胡国荣, 刘智敏, 方正升, 等. 功能材料, 2005, 36 (03): 335--339.
[8] 徐志军, 初瑞清, 李国荣, 等(XU Zhi-Jun, et al). 无机材
料学报(Joural of Inorganic Material), 2004, 19 (6): 1240--1248.
[9] Che S L, Sakurai O, Shinozaki K, et al. J. Aerosol Sci, 1998, 29: 271--278.
[10] Messing G L, Zhang S C, Jayanthi G V. J. Am. Ceram. Soc., 1993, 76 (11): 2707--2719.
[11] Matijevic E, Hsu W P. J. Colloid Interface Sci., 1987, 118: 506--523.
[12] Sordelet D, Akinic M. J. Colloid Interface Sci., 1988, 122: 47--59.
[13] Roh H S, Kang Y C, Park S B. J. Colloid Interface Sci., 2000, 228: 195--199.
Options
文章导航

/

〈 〉