无机材料学报 ›› 2014, Vol. 29 ›› Issue (4): 352-356.DOI: 10.3724/SP.J.1077.2014.13354 CSTR: 32189.14.SP.J.1077.2014.13354

• 研究论文 • 上一篇    下一篇

磺基水杨酸插层Mg/Cu/Zn/Al-LDHs的组装、表征及紫外性能

杜宝中, 唐晓庆, 彭振国, 米海涛   

  1. (西安理工大学 应用化学系, 西安 710048)
  • 收稿日期:2013-07-10 修回日期:2013-09-21 出版日期:2014-04-20 网络出版日期:2014-03-24
  • 基金资助:

    西安市工业科技攻关项目(YF07058)

Assembly, Characterization and Ultraviolet Properties of Sulfosalicylic Acid Intercalated Mg/Cu/Zn/Al-LDHs

DU Bao-Zhong, TANG Xiao-Qing, PENG Zhen-Guo, MI Hai-Tao   

  1. (Department of Applied Chemistry Xi’an University of Technology, Xi’an 710048, China)
  • Received:2013-07-10 Revised:2013-09-21 Published:2014-04-20 Online:2014-03-24
  • Supported by:

    Science and Technique Foundation of Xi’an City (YF07058)

摘要: 以共沉淀法制备了磺基水杨酸插层Mg/Cu/Zn/Al-LDHs复合材料, 借助XRD、FT-IR、TG-DTA等手段对样品测试表明, 客体进入LDHs层间, 层间距由0.832 nm扩至1.125 nm, 推测了层间排列模型; EDS分析验证了插层后层板元素组成比接近理论比值, 插层组装仍能保持良好的层状结构, 且客体进入层间因静电和氢键等作用提高了热稳定性; 同时由UV-DRS结果可知, 插层LDHs复合材料对紫外线具有良好的屏蔽和吸收双重作用。

关键词: 类水滑石, 磺基水杨酸, 插层组装, 紫外吸收与屏蔽

Abstract: Sulfosalicylic acid intercalated Mg/Cu/Al-LDHs composite material was prepared by coprecipitation method. The as-prepared material was characterized by XRD, FT-IR and TG-DTA measurements. It was found that the object was intercalated into LDHs layers and the layer distance changed from 0.832 nm to 1.125 nm. Based on these data, a structure model about the LDHs layers was speculated. EDS analysis verified that the element ratio of intercalated LDHs was close to the theoretical value and the LDHs excellent layer structure was maintained after intercalating assembly. Furthermore, the thermal stability of LDHs was improved due to the effects of electrostatic and hydrogen bond between the object and basal planes. Meanwhile, it was indicated by UV-DRS results that the intercalated LDHs composite show both shielding and absorbing effects to UV light.

Key words: hydrotalcite like compounds, sulfosalicylic acid, intercalation assembly, UV absorption and shielding format

中图分类号: