陶瓷燃料电池电解质流延膜的烧结工艺及其性能研究

无机材料学报

陶瓷燃料电池电解质流延膜的烧结工艺及其性能研究

贺连星; 温廷琏; 吕之奕

中国科学院上海硅酸盐研究所; 上海 200050

收稿日期:1997-01-13 修回日期:1997-02-27 出版日期:1998-04-20 网络出版日期:1998-04-20

Study of Sintering Technique and Properties of Tape-casting Electrolyte for Ceramic Fuel Cell

HE Lian-Xing; WEN Ting-Llian; LU Zhi-Yi

State Key Lab of High Performance Ceramics and Superfine Microstructure; Shanghai Institute of Ceramics; Chinese Academy of Sciences Shanghai 200050 China

Received:1997-01-13 Revised:1997-02-27 Published:1998-04-20 Online:1998-04-20

摘要/Abstract

摘要： 本文采用“三明治式多孔夹板”烧结方法制得了均匀致密的、用于燃料电池的固体电解质膜材，用SEM方法观察了膜材的微观形貌，还用复数阻抗频谱仪对烧结膜材的电导性能进行了测定，实验结果表明，所采用的烧结工艺能有效解决单层厚膜烧结中易出现的起翘与开裂问题，所制得的膜材的电性能亦能满足陶瓷燃料电池的要求．

关键词: 流延法, 厚膜烧结

Abstract: A " sandwich" sintering method was employed for YSZ electrolyte membranes which were prepared by tape casting.Smooth and dense electrolyte membranes suitable for ceramic fuel cell were obtained. The microstructures and elctricaJ conductivity of sintered tape was determined.The experimental results showed that the sintering technique used is efficient for making electrolytemembrances, and their electronic conductivities were good enough for ceramic fuel cells.

Key words: tape casting, sintering of green tape

中图分类号:

TM911

贺连星,温廷琏,吕之奕. 陶瓷燃料电池电解质流延膜的烧结工艺及其性能研究[J]. 无机材料学报.

HE Lian-Xing,WEN Ting-Llian,LU Zhi-Yi. Study of Sintering Technique and Properties of Tape-casting Electrolyte for Ceramic Fuel Cell[J]. Journal of Inorganic Materials.

[1]	骆婷, 史坚, 王绍荣, 占忠亮. 共流延法制备固体氧化物燃料电池阳极的优化[J]. 无机材料学报, 2014, 29(2): 203-208.
[2]	李伟, 熊兆贤, 薛昊. 流延法制备片式CaCu₃Ti₄O₁₂陶瓷及其性能研究[J]. 无机材料学报, 2014, 29(11): 1228-1232.
[3]	陈铭,温廷琏,黄臻,王评初,屠恒勇,吕之奕. YSZ陶瓷膜流延等静压复合成型新工艺研究[J]. 无机材料学报, 1999, 14(5): 745-750.
[4]	贺连星,温廷琏,吕之奕. 氧化锆粉末特性和有机添加剂对流延法制膜的影响[J]. 无机材料学报, 1998, 13(1): 117-121.