高级检索
无机材料学报

无机材料学报 ›› 2011, Vol. 26 ›› Issue (10): 1020-1024.DOI: 10.3724/SP.J.1077.2011.01020 CSTR: 32189.14.SP.J.1077.2011.01020

• 研究论文 • 上一篇    下一篇

纳米碳管对泡沫炭的超临界发泡行为及其力学性能的影响机制

鲍 英1, 王春晓1, 詹 亮1, 王艳莉1, 杨光智2, 杨俊和2, 凌立成1   

  1. (1. 华东理工大学 化学工程联合国家重点实验室, 特种功能高分子材料及其相关技术教育部重点实验室, 上海 200237; 2. 上海理工大学 材料科学与工程学院, 上海200093)
  • 收稿日期:2010-12-13 修回日期:2011-03-08 出版日期:2011-10-20 网络出版日期:2011-09-20
  • 作者简介:鲍 英(1962-), 女, 博士.
  • 基金资助:

    中央高校基本科研业务费专项基金(WA1014016); 国家自然科学基金(50730003, 50672025, 20806024, 51002051); 国家863重点项目(2008AA062302); 国家科技支撑计划项目(2009BAE72B04)

Effect Mechanisms of Carbon Nanotubes on the Supercritical Foaming Behaviors and Mechanical Performance of Carbon Foam

BAO Ying1, WANG Chun-Xiao1, ZHAN Liang1, WANG Yan-Li1, YANG Guang-Zhi2, YANG Jun-He2, LING Li-Cheng1   

  1. (1. State Key Laboratory of Chemical Engineering, Key Laboratory for Specially Functional Polymers and Related Technology of Ministry of Education, East China University of Science and Technology, Shanghai 200237, China; 2. University of Shanghai for Science and Technology, School of Material Science and Engneering, Shanghai 200093, China)
  • Received:2010-12-13 Revised:2011-03-08 Published:2011-10-20 Online:2011-09-20
  • Supported by:

    The Fundamental Research Funds for the Central Universities (WA1014016); National Natural Science Foundation of China (50730003, 50672025, 20806024, 51002051); 863 Program (2008AA062302); National Key Technology R&D Program (2009BAE72B04)

PDF (PC)

1393

被引次数

9 | 3

摘要： 采用超声波?磁力搅拌的方法, 实现了纳米碳管(CNTs)在中间相沥青(MP)中的均匀分散, 并考察了CNTs对泡沫炭的超临界发泡行为及其压缩强度的影响. 研究结果表明: 在超临界发泡过程中, 处于过饱和状态的甲苯将优先在CNTs/MP固-液界面处成核, 进而不断扩散、聚集、膨胀和发泡, 导致泡沫炭孔结构的均一性得以提高; 当在中间相沥青中均匀分散3.5wt%的CNTs后, 所制泡沫炭的压缩强度由3.2MPa提高到4.7MPa, 升高了46.9%; CNTs良好的导热性能降低了基体碳在石墨化过程中的热应力差异, 使得微裂纹的数量减少, 并且其一维纳米结构使得石墨化泡沫炭的孔壁和韧带结构得以增强. 

关键词: 泡沫炭, 纳米碳管, 超临界发泡

Abstract: Carbon nanotubes (CNTs) were dispersed uniformly into mesophase pitch (MP) by the co-dispersion of ultrasonic and magnetic force stirring. Effects of CNTs on the supercritical foaming behaviors and mechanical performance of carbon foams were investigated. The results indicate that cell nuclei will form firstly at the CNT/MP interface in the supercritical foaming process, and then diffuse, aggregate, expanse and foam. CNTs can improve the homogenicity of pore structure due to the uniform dispersed CNT/MP interface. When MP is mixed with 3.5wt% CNTs, the compressive strength of graphitized foam increases from 3.2MPa to 4.7 MPa. In the graphitization process, the heat-stress different of carbon will decrease due to the high thermal conductivity of CNTs, leading to the decrease of the amount of microcracks. Meanwhile, the one-dimensional structure of CNTs reinforces the mechanical strength of pore walls and ligaments.

Key words: carbon foam, carbon nanotube, supercritical foaming

中图分类号: