研究论文

碱式氯化镁晶须表面接枝甲基丙烯酸甲酯聚合反应的研究

  • 张 路 ,
  • 陈雪刚 ,
  • 姚志通 ,
  • 叶 瑛 ,
  • 夏枚生
展开
  • 浙江大学 理学院 地球科学系, 杭州 310000

收稿日期: 2008-11-28

  修回日期: 2009-03-10

  网络出版日期: 2009-07-20

Study on the Radical Grafting Polymerization of MMA onto Basic Magnesium Chloride Whisker Surface

  • ZHANG Lu ,
  • CHEN Xue-Gang ,
  • YAO Zhi-Tong ,
  • YE Ying ,
  • XIA Mei-Sheng
Expand
  • Department of Earth Sciences, College of Science, Zhejiang University, Hangzhou 310000, China

Received date: 2008-11-28

  Revised date: 2009-03-10

  Online published: 2009-07-20

摘要

采用卤水法自制纳米级碱式氯化镁晶须(nano-BMC)为原料, 晶须表面经硅烷偶联剂γ-MPS处理后, 以水溶性引发剂K2S2O8(KPS)在乙醇/水混合溶剂中引发甲基丙烯酸甲酯(MMA)进行表面接枝聚合反应, 制备了nano-BMC/γ-MPS/PMMA纳米复合材料, 通过FT-IR、SEM、XRD表征了nano-BMC/γ-MPS/PMMA纳米复合材料的结构及形态, 讨论了反应条件对晶须形貌保存、接枝聚合反应效果的影响. 结果表明:反应条件对nano-BMC晶须形貌有明显的影响; 乙醇/水介质配比为8∶2、反应温度82℃、反应时间6h时, nano-BMC晶须形貌能够被较好地保存, 且接枝效率达到最高(56.1%).

本文引用格式

张 路 , 陈雪刚 , 姚志通 , 叶 瑛 , 夏枚生 . 碱式氯化镁晶须表面接枝甲基丙烯酸甲酯聚合反应的研究[J]. 无机材料学报, 2009 , 24(4) : 859 -863 . DOI: 10.3724/SP.J.1077.2009.00859

Abstract

The composite material nano-BMC/γ-MPS/PMMA was prepared using nano-BMC as raw material, which was obtained by brine method. The nano-BMC whisker was pretreated by silane coupling agent 3-(trimethoxysilyl) propyl methacrylate (γ-MPS) and then conducted to surface radical grafting polymerization which is initiated by water-soluble initiator K2S2O8 in ethanol/water mixture. The structure and morphology of nano-BMC/γ-MPS/PMMA was characterized by Fourier Transformed Infrared Spectroscope (FT-IR), Scanning Electron Microscope (SEM) and X-ray Diffraction (XRD) analysis. The influences of reaction conditions on the conservation of whisker morphology and grafting polymerization were investigated. The result shows that the reaction conditions have a significant effect on the morphology of nano-BMC whisker. The grafting efficiency reaches 56.1% and the morphology of nano-BMC whisker is well conserved when the reaction is kept at 82℃ for 6h in the ethanol-water solution with the 8∶2 ratio of ethanol to water.

参考文献

[1]贾巧英, 马晓燕, 梁国正, 等. 高分子通报, 2002(06): 71-78.
[2]卡茨 H S. 塑料用填料及增强剂手册.北京:化学工业出版社,1994: 20-22.
[3]Evans C C. Whiskers. London: Mills Boon Limited, 1972: 1-68.
[4]Xu Jiasheng, Xue Dongfeng. Journal of Physics and Chemistry of Solids, 2006, 67(7): 1427-1431.
[5]Hideki Sugimoto, Kazuki Daimatsu, Eiji Nakanishi, et al. Polymer, 2006, 47(11): 3754-3759.
[6]李广宇, 李子东, 叶 进. 热固性树脂, 2000, 15(2): 48-51.
[7]徐守芳, 李春忠, 陈雪花. 华东理工大学学报(自然科学版), 2005, 31(5): 602-605.
[8]钱翼清, 范牛奔, 孟海兵. 功能材料, 2001, 32(6): 652-655.
[9]史建明,黄志明,包永忠,等.高校化学工程学报, 2006, 20(1): 104-108.
[10]徐 惠, 史建新, 翟 钧, 等. 高分子材料科学与工程, 2008, 24(2): 27-31.
[11]Craig Aileen A, Winchester Ian, Madden Patricia C, et al. Polymer, 1998, 39(5): 1197-1205.
[12]陈雪花,李春忠,邵 玮,等.华东理工大学学报(自然科学版),2006, 32(2): 212-217.
[13]吴石山, 吴 静, 韦亚兵, 等. 功能材料, 2004, 35(1): 127-129.
[14]Altmaier M, Metz V, Neck V, et al. Geochimica et Cosmochimica Acta, 2003, 67(19): 3595-3601.
[15]Maurizio Avella, Ezio Martuscelli, Giuseppe Orsello, et al. Polymer, 1997, 38(25): 6135-6143.
[16]保积庆, 夏树屏. 应用化学, 1995, 12(3): 43-47.
[17]张开闩, 陈一民. 化工新型材料, 2007, 35(12): 42-44.
[18]姚连增. 晶体生长基础.北京:中国科学技术出版社, 1994: 19-21.
[19]Ma Renzhi, Bando Yoshio. Chemical Physics Letters, 2003, 370(5/6): 770-773.
[20]Wei Huiying, Wu Youshi, Nlun Ning, et al. Materials Science and Engineering, 2005, 393(1): 80-82.
文章导航

/