高级检索
无机材料学报

无机材料学报 >

2006 , Vol. 21 >Issue 5: 1079 - 1084

DOI: https://doi.org/10.3724/SP.J.1077.2006.01079

研究论文

撞击流微反应器制备超细硫酸钡研究

  • 吴国华 ,
  • 周洪兆 ,
  • 朱慎林
展开
  • 清华大学化学工程联合国家重点实验室, 北京 100084

收稿日期: 2005-09-19

  修回日期: 2005-12-23

  网络出版日期: 2006-09-20

收起

Preparation of Ultrafine Barium Sulfate in Impinging Streams Microreactor

  • WU Guo-Hua ,
  • ZHOU Hong-Zhao ,
  • ZHU Shen-Lin
Expand
  • Department of Chemical Engineering, State Key Laboratory of Chemical Engineering, Tsinghua University, Beijing 100084, China

Received date: 2005-09-19

  Revised date: 2005-12-23

  Online published: 2006-09-20

Fold

摘要

采用撞击流微反应器制备超细硫酸钡粉体, 并用XRD、TEM、BET对粉体的性质进行了表征. 实验表明, 采用撞击流微反应器, 提高了微混合性能使得反应体系获得均匀的过饱和度, 得到了平均粒径约100nm, 比表面积约60m2·g-1的超细硫酸钡粉体. 考察了撞击速度和撞击角度等因素的影响, 确定了优化的实验条件.

关键词： 撞击流; 微反应器; 超细硫酸钡

本文引用格式

吴国华 , 周洪兆 , 朱慎林 . 撞击流微反应器制备超细硫酸钡研究[J]. 无机材料学报, 2006 , 21(5) : 1079 -1084 . DOI: 10.3724/SP.J.1077.2006.01079

Abstract

PAANH4 was used as dispersant to improve the dispersibility of particles. The velocity and angle of the impinging streams were investigated to obtain the optimum conditions. Ultrafine barium sulfate particles were prepared in the impinging streams microreactor. The ultrafine particles were characterized by XRD, TEM, and BET. The results indicate that micromixing and homogeneous supersaturation of the reaction are enhanced by impinging streams. The product is obtained as particles with mean size of 100nm and specific surface area of 60m2·g-1.

Key words： impinging streams; microreactor; ultrafine barium sulfate

参考文献

[1] Qi L M, Ma J M, et al. Colloids and Surfaces, 1996, 108: 117--126.
[2] Gan L M, Zhang L H, et al. Material Chemistry and Physics, 1995, 40: 94--98.
[3] 周鸿顺, 杨荣榛(ZHOU Hong-shun, et al). 陕西师范大学学报(自然科学版) (Journal of Shanxi Normal University(Natural Science Edition)), 1998, 26(3): 71--73.
[4] 王晓辉, 蒋斌波, 陈纪忠(WANG Xiao-hui, et al). 无机材料学报(Journal of Inorganic Materials), 2005, 20(4): 801--807.
[5] Mark S, Julian E, Sean D. Langmuir, 2002, 18(12): 5023--5026.
[6] Chen G G, Luo G S. Powder Technology, 2004, 139: 180--185.
[7] UCHIDA M, SUE A. Journal of Mater. Sci. Lett., 2002, 15: 1373--1374.
[8] Chen J F, Shen Z G, Liu F T. Scripta Materialia, 2003, 49(6): 509--514.
[9] Wang S J, Devahastin S, Mujumdar A S. Applied Thermal Engineering, 2005, 25: 253--269.
[10] Zhou H Z, Wu G H, Zhu S L. 2nd Chinese National Chemical and Biochemical Engineering Annual Meeting, Peking, China, 2005.
[11] 张立德. 超微粉体制备与应用技术, 第一版. 北京: 中国石化出版社, 2001. 237--239.
[12] 徐华蕊, 李凤生, 陈舒林, 等(XU H R, et al). 化工进展(Chemical Industry and Engineering Progress), 1996, (5): 29--31.
[13] 周洪兆, 朱慎林(ZHOU H Z, et al). 机械工程材料(Materials for Mechanical Engineering), 2005, 29(4): 17--19.
Options
文章导航

/

〈 〉