研究论文

等离子喷涂抗菌羟基磷灰石涂层研究

  • 郑学斌 ,
  • 季珩 ,
  • 黄静琪 ,
  • 丁传贤 ,
  • 朱梓圆 ,
  • 张富强
展开
  • 1. 中国科学院上海硅酸盐研究所, 上海 200050;
    2. 上海第二医科大学附属第九人民医院, 上海 200011

收稿日期: 2005-04-29

  修回日期: 2005-06-14

  网络出版日期: 2006-05-20

Plasma Sprayed Antibacterial HA Coatings

  • ZHENG Xue-Bin ,
  • JI Heng ,
  • HUANG JING-Qi ,
  • DING CHUAN-Xian ZHU Zi-Yuan ,
  • ZHANG Fu-Qiang
Expand
  • 1. Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai
    200050, China;
    2. Shanghai Ninth People's Hospital, Shanghai Second Medical University, Shanghai 200011, China

Received date: 2005-04-29

  Revised date: 2005-06-14

  Online published: 2006-05-20

摘要

以磷酸锆载银抗菌剂作为添加剂, 制备真空等离子喷涂抗菌羟基磷灰石(HA)涂层, 并对涂层的形貌、组成、结合强度以及抗菌性能进行研究. 结果表明, 添加抗菌剂的HA涂层形貌没有发生明显改变. 当添加剂含量较大时(10wt%), 涂层中出现少量反应产物CaZr(PO4)2与Na6CaP2O9. 掺入抗菌剂之后涂层的结合强度呈上升趋势, 而且随着抗菌剂百分比的增加, 涂层结合强度随之增大. 含抗菌剂5wt%以上的HA涂层对牙龈单胞卟啉菌(Pg)、具核梭杆菌(Fn)及伴放线杆菌(Aa)具有明显的抗菌作用, 抗菌力大小依次为Pg>Fn>Aa.

本文引用格式

郑学斌 , 季珩 , 黄静琪 , 丁传贤 , 朱梓圆 , 张富强 . 等离子喷涂抗菌羟基磷灰石涂层研究[J]. 无机材料学报, 2006 , 21(3) : 764 -768 . DOI: 10.3724/SP.J.1077.2006.00764

Abstract

HA coatings with silver-zirconium phosphate antimicrobial were prepared via vacuum plasma spraying, and then their surface morphologies, phase compositions, bonding strengths and antibacterial capability were examined. The results obtained show that no obvious change of the surface morphologies is observed after adding antimicrobial in HA coatings. Some new phases such as CaZr(PO4)2 and Na6CaP2O9 appear in the coatings when the antimicrobial
content is high to 10wt%. The bonding strengths of the HA coatings with antimicrobial are higher than that of the HA coating, and the values increase with the increase of antimicrobial content in the coatings. The coatings with the content of antimicrobial equal to or higher than 5% are effectively antibacterial to Pg, Fn and Aa. The antibacterial ability is ordered as Pg>Fn>Aa.

参考文献

1 付俊. 国外医学口腔医学分册, 2004, 31: 111-113.
2 Mombelli A, Lang N P, Nyman S. Oral Microbiology and Immunology, 1987, 2: 145-150.
3 Leonhardt A, Adolfsson B, Lekholm U, et al. Clinical Oral Implants Research, 1992, 3: 112-116.
4 Kawahara K, Tsuruda K, Uchida M. Dental Materials, 2000, 16(6): 452-455.
5 Bellantone M, Coleman N J, Hench L L. J. Biomed Mater. Res., 2000, 51(3): 484-490.
6 Gristina A, Sherk H H. Science, 1987, 237: 1588-1595.
文章导航

/