高级检索
无机材料学报

无机材料学报 >

2009 , Vol. 24 >Issue 1: 43 - 48

DOI: https://doi.org/10.3724/SP.J.1077.2009.00043

研究论文

酸对合成二氧化钛介孔材料的影响

  • 何菁萍 ,
  • 张 昭 ,
  • 沈 俊 ,
  • 张钰婷 ,
  • 陈垚翰
展开
  • 四川大学 化工学院， 成都 610065

收稿日期: 2008-04-03

  修回日期: 2008-06-03

  网络出版日期: 2009-01-20

收起

Effects of Acid on Synthesis of Mesoporous Titania

  • HE Jing-Ping ,
  • ZHANG Zhao ,
  • SHEN Jun ,
  • ZHANG Yu-Ting ,
  • CHEN Yao-Han
Expand
  • School of Chemical Engineering, Sichuan University, Chengdu 610065, China

Received date: 2008-04-03

  Revised date: 2008-06-03

  Online published: 2009-01-20

Fold

摘要

以硫酸和乙酸为酸度调节试剂，采用Sol-Gel过程和水热处理结合，在没有添加任何表面活性剂作模板剂的条件下，通过钛酸丁酯（TBOT）在酸性体系中的控制水解和自组装制备TiO2介孔材料.产物采用XRD、N2吸附-脱附等温线、TG-DSC进行分析表征.通过选择酸的种类和控制酸的浓度，添加配位抑制剂TEA减缓Ti的水解速率，可合成介孔纯TiO2材料.使用硫酸（H2SO4∶TBOT＝1∶1，摩尔比）和TEA制备出比表面积为176m2/g，孔容为0.222cm3/g，平均孔径约5nm，孔径分布窄，热稳定性较好的TiO2介孔材料.

关键词： 介孔TiO2; 钛酸丁酯; 酸性水解; 表征

本文引用格式

何菁萍 , 张 昭 , 沈 俊 , 张钰婷 , 陈垚翰 . 酸对合成二氧化钛介孔材料的影响[J]. 无机材料学报, 2009 , 24(1) : 43 -48 . DOI: 10.3724/SP.J.1077.2009.00043

Abstract

The mesoporous titania was prepared via Sol-Gel process from Ti(n-C4H9O)4(TBOT) without surfactant templates. Using sulfuric acid or acetic acid as acidity regulator, the TBOT was hydrolyzed in an acidic system, and then its hydrolysate was treated by hydrothermal method. The products were characterized by XRD, N2 adsorption-desorption isotherm and TG-DSC. The results indicate that mesoporous TiO2 can be synthesized through selecting acid, controlling acid concentration and supplementing TEA which can reduce the hydrolysis rate of TBOT. The mesoporous TiO2, prepared with the mole ratio of H2SO4/TBOT/TEA＝1/1/1, shows a surface area of 176m2/g, pore volume of 0.222cm3/g, mean pore size of 5nm, and narrow pore size distribution, and its thermal stability is excellent.

Key words： TiO2; tetrabutyl titanate; acidic hydrolysis; characterization

参考文献

［1］Kresge C T, Leonowiez M E, Roth W J, et al. Nature, 1992, 359(6397): 710-712.
［2］张 波, 周春晖, 卢晗峰, 等. 浙江工业大学学报, 2001, 29(2): 185-190.
［3］Davis M E. Nature, 2002, 417(6891): 813-821.
［4］Berlini C, Ferraris G, Guidotti M, et al. Micropor. Mesopor. Mater., 2001, 44-45: 595-602.
［5］沈绍典, 李裕绮, 武芳卉, 等. 高等学校化学学报, 2002, 23(3): 358-360.
［6］Hirashima H, Imai H, Balek V. J. Non-Cryst. Solids, 2001, 285(1-3): 96-100.
［7］Antonelli D M, Ying J Y. Angew. Chem. Int. Edn Engl., 1995, 34(18): 2014-2017.
［8］Cabrera S, Haskouri J E, Guillem C, et al. Solid State Sci., 2000, 2(4): 405-420.
［9］Yusuf M M, Imai H, Hirashima H. J. Non-Cryst. Solids, 2001, 285(1-3): 90-95.
［10］Yoshitake H, Sugihara T, Tatsumi T. Chem. Mater., 2002, 14(3): 1023-1029.
［11］Dai Q, Shi L Y, Luo Y G, et al. J. Photochem. Photobiolo. A: Chem., 2002, 148(1-3): 295-301.
［12］Wang Y D, Ma C L, Sun X D, et al. Appl. Catal. A: General, 2003, 246(1): 161-170.
［13］Cabrera S, Haskouri J E, Beltran-Porter A, et al. Solid State Sci., 2000, 2(5): 513-518.
［14］陈洪龄, 王延儒, 时 钧 (CHEN Hong-Ling, et al). 无机材料学报(Journal of Inorganic Materials), 2002, 17(1): 149-153.
［15］张 昭, 彭少方, 刘栋昌. 无机精细化工工艺学. 北京: 化学工业出版社, 2002: 81-90.
［16］马亚鲁, 王 英, 张彦军. 应用化学, 2002, 19(5): 450-454.
［17］张立德. 纳米材料. 北京: 化学工业出版社, 2000:103-113.
［18］刘汉兴, 尹承烈. 有机化学, 1989, 2(5): 417-422.
［19］徐如人, 庞文琴, 于吉红. 分子筛与多孔材料化学. 北京: 科学出版社, 2004: 145-155.
［20］沈 俊, 田从学, 张 昭. 催化学报, 2006, 27(11): 949-951.
Options
文章导航

/

〈 〉