采用等温等压化学气相浸渗法(ICVI)制备了二维碳纤维增韧碳化硅碳二元基复合材料(2D Cf/(SiC-C)).利用扫描电镜(SEM)和背散射电子成像(BSE)研究了其基体的微观结构, 并与二维碳纤维增韧碳化硅陶瓷基复合材料(2D Cf/SiC)比较了室温力学性能和断口形貌.结果表明：2D Cf/(SiC-C)复合材料的基体是由SiC与热解碳(PyC)组成的多层结构, PyC基体层分布均匀而连续, 且与SiC基体层结合紧密.纤维束内部PyC基体层较厚的2D Cf/(SiC-C)复合材料具有较高的强韧性, 其拉伸强度、断裂应变、断裂韧性和断裂功分别比2D Cf/SiC复合材料的提高了3%、142%、22%和58%.SiC与PyC组成的多层基体使2D Cf/(SiC-C)复合材料的纤维在拔出过程中发生了两次集中拔出, 且第一次集中拔出的纤维对复合材料的强韧性起主要作用.
Two dimensional carbon fiber-reinforced silicon carbide-carbon binary matrix composites (2D Cf/(SiC-C)) were fabricated by means of isothermal and isobaric chemical vapor infiltration (ICVI). The matrix structures of the 2D Cf/(SiC-C) composites were characterized by the backscattered electron imaging (BSE) of scanning electron microscope (SEM). Furthermore, their room temperature mechanical properties and fracture surfaces were compared with two dimensional carbon fiber-reinforced silicon carbide matrix composite (2D Cf/SiC). The results indicate that the matrices in the 2D Cf/(SiC-C) composites are multilayered structures composed of SiC and PyC layers. The PyC matrix layers are homogeneous and continuous, which are bonding well with SiC matrix layers. The 2D Cf/(SiC-C) composite with a thicker PyC matrix layer in fiber bundles exhibits better mechanical properties. Meanwhile, its tensile strength, failure strain, fracture toughness and fracture work are 3%, 142%, 22% and 58% higher than those of the 2D Cf/SiC composite, respectively. The multilayered matrices composed of SiC and PyC layers, cause the fibers in the 2D Cf/(C-SiC) composites to pull out twice in a concentrated mode. Moreover, the first pull-out fibers play a leading role in enhancing the strength and toughness.
［1］Papenburg U, Beyer S, Laube H, et al. Advanced Ceramic Matrix Composites (CMC’s) for Space Propulsion Systems. 33rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Seattle: WA, 1997: 1-9.
［2］Muhlratzer A, Pfeiffer H. Sampe J., 2002, 38(4): 22-29.
［3］Hald H, Ullmann T. Reentry Flight and Ground Testing Experience with Hot Structures of C/C-SiC Material. 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, Norfolk: VA, 2003: 1-10.
［4］Hald H, Weihs H, Reimer T, et al. Development of Hot CMC Structures for Space Reentry Vehicles via Flight Experiments. AIAA/ICAS International Air and Space Symposium and Exposition: The nest 100 Years, Dayton: OH, 2003: 1-11.
［5］Naslain R. Compos. Sci. Technol., 2004, 64(2): 155-170.
［6］Schmidt S, Beyer S, Knabe H, et al. Acta Astronaut., 2004, 55(3-9): 409-420.
［7］Wang M, Laird C. Acta Mater., 1996, 44(4): 1371-1387.
［8］Camus G, Guillaumat L, Baste S. Compos. Sci. Technol., 1996, 56(12):1363-1372.
［9］Mei H. Compos. Sci. Technol., 2008, 68(15/16): 3285-3292.
［10］张金升, 张银燕, 王美婷, 等. 陶瓷材料显微结构与性能. 北京: 化学工业出版社, 2007:176-194.
［11］周 玉. 陶瓷材料学, 2版. 北京: 科学出版社, 2004: 239-277.
［12］李云凯, 周张健. 陶瓷及其复合材料. 北京: 北京理工大学出版社, 2007: 167-175, 314-326.
［13］Naslain R R. Compos. Part A-Appl. S, 1998, 29(9/10):1145-1155.
［14］Besmann T M, Sheldon B W, Lowden R A, et al. Science, 1991, 253(6): 1104-1109.
［15］Bertrand S, Droillard C, Pailler R, et al. J. Eur. Ceram. Soc., 2000, 20(1): 1-13.
