高级检索
无机材料学报

无机材料学报

• 研究论文 • 上一篇    下一篇

交流电沉积制备SnO2纳米线及其电沉积条件研究

陈艳辉1, 张兴堂1, 薛中会1, 杜祖亮1, 李铁津1,2   

  1. 1. 河南大学特种功能材料重点实验室, 开封 475001; 2. 吉林大学光化学实验室, 长春 130021
  • 收稿日期:2003-12-01 修回日期:2004-02-23 出版日期:2005-01-20 网络出版日期:2005-01-20

Preparation of SnO2 Nanowires by AC Electrodeposition in Anodic Alumina Template and Its Deposition Conditions

CHEN Yan-Hui1, ZHANG Xing-Tang1, XUE Zhong-Hui1, DU Zu-Liang1, LI Tie-Jin2   

  1. 1. Key Lab for Special Functional Materials, Henan University, Kaifeng 475001, China; 2. Department of Chemistry, Jilin University, Changchun
    130021, China
  • Received:2003-12-01 Revised:2004-02-23 Published:2005-01-20 Online:2005-01-20

PDF (PC)

1427

摘要： 采用阳极氧化的方法制备了孔径为30～50nm多孔阳极氧化铝(AAO)模板, 用交流(AC)电沉积法在氧化铝模板孔洞内沉积金属锡, 然后在空气中750℃加热含锡的模板10h, 热氧化制备了直径在30～50nm SnO2纳米线. 用扫描电子显微镜, 透射电子显微镜, X射线衍射仪对所制备的SnO2纳米线进行了表征, 表明所制备的纳米线为多晶结构. 并通过改变交流电沉积过程中的电压, 频率和热氧化时间来考?察不同沉积条件对沉积结果的影响, 发现采用交流沉积制备金属纳米线的过程中, 频率和电压是影响沉积结果的关键因素.

关键词: SnO2纳米线, 氧化铝模板, 交流电沉积

Abstract: By using the anode oxidation method, porous alumina anode oxidation templates (AAo) with a pore diameter of 30～50nm were
prepared, and metal tin nanowires electrodeposited in the pores of AAO, then the AAO with tin nanowires annealed in muffle in air at 750℃
for 10h, and SnO2 nanowires formed. The effects of electrodeposition conditions, such as frequency, voltage, on the filling ratio of tin were also studied. SEM, TEM, XRD results show
that these polycrystalline SnO2 nanowires have a diameter of 30～50nm, voltage and frequency are the key factors affecting the electrodeposition results.

Key words: SnO2 nanowire, AAO, AC electrodepositon

中图分类号: