3D打印氧化铝陶瓷的气氛脱脂热处理工艺研究
曾勇1,2,3(
), 张子佳1,2,3, 孙立君1,2,3, 姚海华1,2,3, 陈继民1,2,3
), 张子佳1,2,3, 孙立君1,2,3, 姚海华1,2,3, 陈继民1,2,3
Atmosphere Debinding Heat Treatment of 3D Printed Alumina Ceramics
ZENG Yong1,2,3(), ZHANG Zijia1,2,3, SUN Lijun1,2,3, YAO Haihua1,2,3, CHEN Jiming1,2,3
), ZHANG Zijia1,2,3, SUN Lijun1,2,3, YAO Haihua1,2,3, CHEN Jiming1,2,3
图2. 氧化铝生坯在不同气氛中脱脂得到的样品照片
Fig. 2. Photos of alumina green body obtained after debinding in different atmospheres
(a) In air; (b) In argon
