[an error occurred while processing this directive]
熔融沉积法3D打印制备氧化锆陶瓷及其力学性能研究
张力1(), 杨现锋1(), 徐协文1, 郭金玉1, 周哲1, 刘鹏1, 谢志鹏2
3D Printed Zirconia Ceramics via Fused Deposit Modeling and Its Mechanical Properties
ZHANG Li1(), YANG Xianfeng1(), XU Xiewen1, GUO Jinyu1, ZHOU Zhe1, LIU Peng1, XIE Zhipeng2

图3. 打印坯和烧结陶瓷的SEM照片

Fig. 3. SEM images of the printed green body and sintered ceramics
(a) Surface of the green body and partial enlarged SEM image; (b) SEM image of fracture surface of green body; (c) Partial enlarged SEM image of Fig. 3(b); (d) Surface of the sintered part and partial enlarged SEM image; (e) SEM image of fracture surface of sintered part; (f) Partial enlarged SEM image of Fig. 3(e)