熔融沉积法3D打印制备氧化锆陶瓷及其力学性能研究
张力1(
), 杨现锋1(), 徐协文1, 郭金玉1, 周哲1, 刘鹏1, 谢志鹏2
), 杨现锋1(), 徐协文1, 郭金玉1, 周哲1, 刘鹏1, 谢志鹏2
3D Printed Zirconia Ceramics via Fused Deposit Modeling and Its Mechanical Properties
ZHANG Li1(), YANG Xianfeng1(), XU Xiewen1, GUO Jinyu1, ZHOU Zhe1, LIU Peng1, XIE Zhipeng2
), YANG Xianfeng1(), XU Xiewen1, GUO Jinyu1, ZHOU Zhe1, LIU Peng1, XIE Zhipeng2
图2. 混合料的流变学性质和打印性能
Fig. 2. Rheology and printability of the feedstock
(a) Viscosity at various shear rate at 170 ℃; (b) Schematic diagram of the extrusion mechanism; (c) Unsupported structures with different inclinations; (d) Unsupported structures with different spans
