熔融沉积法3D打印制备氧化锆陶瓷及其力学性能研究
张力1(
), 杨现锋1(), 徐协文1, 郭金玉1, 周哲1, 刘鹏1, 谢志鹏2
), 杨现锋1(), 徐协文1, 郭金玉1, 周哲1, 刘鹏1, 谢志鹏2
3D Printed Zirconia Ceramics via Fused Deposit Modeling and Its Mechanical Properties
ZHANG Li1(), YANG Xianfeng1(), XU Xiewen1, GUO Jinyu1, ZHOU Zhe1, LIU Peng1, XIE Zhipeng2
), YANG Xianfeng1(), XU Xiewen1, GUO Jinyu1, ZHOU Zhe1, LIU Peng1, XIE Zhipeng2
图1. 制备样品打印路径示意图
Fig. 1. Printing path for sample preparation
(a) Single line pattern; (b) “Single line + rectangle” pattern; (c) Porous ceramic
