¡¡http://www.jim.org.cn
 ¡ö By collections ¡¡ ¡¡ ¡ö Provided for the home page
siccas
Indexed in SCI, EI, CSA
¡¡ | Home | About Journal | Editorial Board | Instruction | Subscribe | Editorial Notice | Contacts us | Message | Chinese
¡¡  Online Office Entrance
 
¡¡  Online Journals ¡¡¡¡
 
¡¡  Download Center ¡¡¡¡
 
    Related Links
  JFMD
¡¡¡¡¡¡¡¡¡¡¡¡More>>

Visit £º

¡¡Quick Search
 
 
  2008 23 (6)
   Nov. 20, 2008
 
 
 
 
 
 
1089 ZHU Chong-Qiang , YANG Chun-Hui , WANG Meng , XIA Shi-Xing and
  Developments of Point Defects in ZnGeP2 Crystals
    ZnGeP2 is a nonlinear optical material which is useful for important applications in the infrared region. A serious limitation to the development of ZnGeP2-based applications is the presence of point defects in the crystals. The late...
    2008 23 (6): 1089-1095 [Abstract ] ( 170 ) [HTML 0KB] [PDF 716KB ]( 261 )
1096 LIU Ming , WEI Wei , QU Sheng-Wei , GU Jian-Feng , MA Chun-Yu and ZHANG Qing-Yu
  Effect of Oxygen Pressure on the Growth Behavior and Optical Properties of ZnO Films
    Using a reactive radio-frequent magnetron sputtering method, high c-axis oriented ZnO films were deposited on Si (001) and quartz substrates under various oxygen partial pressures with a total pressure of 0.3Pa. Atomic force microscope, X-ray dif...
    2008 23 (6): 1096-1100 [Abstract ] ( 129 ) [HTML 0KB] [PDF 660KB ]( 199 )
1101 JIANG Min-Hong , , LIU Xin-Yu and
  Preparation and Photoelectric Properties of Al-Ti Codoped ZnO Thin Films with [100] Preferred Orientation
    Al-Ti codoped ZnO (ZATO) films with (100) preferred orientation were grown on the glass substrates at room temperature by RF magnetron sputtering. The Al-Ti codoped ZnO ceramic targets used for sputtering were prepared by the conventional solid-state sint...
    2008 23 (6): 1101-1105 [Abstract ] ( 135 ) [HTML 0KB] [PDF 373KB ]( 168 )
1106 ZHANG De-Yin , , HUANG Da-Gui , LI Jin-Hua and LI Kun
  Preparation and Electrical Properties of LiTa3O8 Thin Films
    A novel ferroelectric lithium tantalate LiTa3O8 thin film was prepared on Pt/Ti/SiO 2/Si substrate by sol-gel method using lithium ethoxide and tantalite ethoxide as starting materials. The structure of the LiTa3
    2008 23 (6): 1106-1110 [Abstract ] ( 138 ) [HTML 0KB] [PDF 541KB ]( 176 )
1111 SUN Hua-Jun , HOU Li-Song , WU Yi-Qun and WEI Jing-Song
  Laser Induced Change in the Electrical and Optical Properties of Amorphous Ge2Sb2Te5 Thin Films
    Sheet resistance of laser-irradiated amorphous Ge2Sb2Te5 thin films prepared by magnetron sputtering were measured by the four-point probe method. With the laser power increasing, the sheet resistance undergoes an abrupt c...
    2008 23 (6): 1111-1114 [Abstract ] ( 118 ) [HTML 0KB] [PDF 449KB ]( 150 )
1115 JU Jian , HAO Xiao-Gang , ZHANG Zhong-Lin , LIU Shi-Bin and SUN Yan-Ping
  Electrochemically Controlled Ion Separation Performances of Electrodeposited Nickel Hexacyanoferrate Thin Films in Alkaline Earth Metal Solution
    Nickel hexacyanoferrate (NiHCF) thin films were synthesized on platinum substrates by cathodic deposition and the film-electrode systems were investigated as electrochemically controlled ion separation (ECIS) materials for the selective separation of alka...
    2008 23 (6): 1115-1120 [Abstract ] ( 120 ) [HTML 0KB] [PDF 650KB ]( 159 )
1121 LI En-Ling , WANG Shan-Shan and WANG Xue-Wen
  Preparation of GaN Film and Investigation of Vibrational Spectrum of GaN by DFT
    Using Ga2O3 as Ga source, the GaN films are successfully deposited on Si (111) substrates by two-step method of sol-gel and high nitridation temperature technique. The as-prepared films were confirmed as single crystalline GaN with w...
    2008 23 (6): 1121-1124 [Abstract ] ( 121 ) [HTML 0KB] [PDF 603KB ]( 158 )
1125 YING Xiang-Yue , NIE Qiu-Hua , DAI Shi-Xun , XU Tie-Feng and JIN Zhen-Juan
  Phonon Mode and Electron-phonon Coupling Strengths Controlling the Fluorescence Efficiency of Dy3+-doped Selenide Glasses
    Pure and Dy3+-doped Ge30Ga5Se65 and 0.9Ge30Ga5Se65+0.1CsBr glasses were prepared by conventional melt-quenching method. The intensity parameters, spontaneous emission probability...
    2008 23 (6): 1125-1130 [Abstract ] ( 118 ) [HTML 0KB] [PDF 490KB ]( 158 )
1131 LI Chang-Qing , ZHANG Ming-Fu , ZUO Hong-Bo , HAN Jie-Cai and MENG Song-He
  Investigation of High-energy Ball Milling of Al-Y2O3 Mixtures and Solid-state Reaction Synthesis of YAG Ceramics
    YAG ceramics were fabricated by solid-state reaction method using high pure powders (Al, Y2O3) as
starting materials. YAG ceramics were fabricated by vacuum sintering YAG compacts which were calcined from high energy milled Al-Y<...
    2008 23 (6): 1131-1134 [Abstract ] ( 128 ) [HTML 0KB] [PDF 589KB ]( 180 )
1135 HUANG Yi-Hua , , JIANG Dong-Liang , ZHANG Jing-Xian and LIN Qing-Ling
  Fabrication of Transparent Yttria Ceramics through Gel-freezing Dry Method
    The effect of gel-freezing dry method (--50¡æ, 8Pa) was investigated on drying and dewatering on a yttrium hydroxynitrate precursor. Precursor through gel-freezing dry accumulated softly with a clearer card-like figure than that through traditional oven d...
    2008 23 (6): 1135-1140 [Abstract ] ( 138 ) [HTML 0KB] [PDF 1515KB ]( 184 )
1141 WANG Fei , ZHANG Kai-Feng and WANG Guo-Feng
  Microstructure and Mechanical Properties of Textured Alumina-Zirconia Composites Prepared by Compressive Deformation
    3Y-ZrO2/Al2O3 fine-grained composite compacts were prepared by vacuum hot pressed sintering and then compressed at elevated temperatures. The microstructure and mechanical properties of the composites before and after defo...
    2008 23 (6): 1141-1146 [Abstract ] ( 113 ) [HTML 0KB] [PDF 815KB ]( 148 )
1147 ZHANG Jian-Feng , SHI Lu , , WANG Lian-Jun , JIANG Wan and CHEN Li-Dong
  Friction and Wear Resistance of Ti3SiC2-SiC Composites
    Ti3SiC2-SiC composites were in situ fabricated by spark plasma sintering technique from the raw powders of Ti, Si, C and small amounts of Al. Pin-disk friction and wear tests were conducted on Ti3SiC2-SiC compos...
    2008 23 (6): 1147-1150 [Abstract ] ( 124 ) [HTML 0KB] [PDF 821KB ]( 167 )
1151 DING Yu-Sheng , DONG Shao-Ming , GAO Le , HE Ping , ZHANG Xiang-Yu and JIANG Dong-Liang
  Effect of Sintering Temperature on Microstructure and Properties of Cf/SiC Composites
    Cf/SiC composites reinforced by carbon fiber were fabricated by hot-pressing. The effects of sintering temperature on the densities, microstructure and mechanical properties were studied. Densities of the Cf/SiC composites are increa...
    2008 23 (6): 1151-1154 [Abstract ] ( 121 ) [HTML 0KB] [PDF 926KB ]( 161 )
1155 LI Shu-Ping , LI Ke-Zhi , GUO Ling-Jun and HE Yong-Gang
  Ablation Performances of the HfC Modified Carbon/carbon Composite Integrated Throat
    The carbon felt reinforced HfC-C/C and C/C composite integrated throats were prepared by thermal gradient chemical vapour infiltration process, and their ablation resistance was determined by using an equipment of solid rocket motor under the pressure of ...
    2008 23 (6): 1155-1158 [Abstract ] ( 121 ) [HTML 0KB] [PDF 1467KB ]( 143 )
1159 CHEN Bo , ZHANG Li-Tong , CHENG Lai-Fei and LUAN Xin-Gang
  Ablation Characteristic of the Pierced C/C Composite Nozzle in a Combustion Gas Generator
    Ablation property of the pierced C/C composite nozzle was investigated via fire testing by a combustion gas generator which simulated oxy-rich combustion environments of the liquid rocket engine. Ablation mechanisms of the pierced C/C composite nozzle and...
    2008 23 (6): 1159-1164 [Abstract ] ( 123 ) [HTML 0KB] [PDF 1656KB ]( 150 )
1165 ZHAO Chun-Nian , CHENG Lai-Fei , ZHANG Li-Tong , XU Yong-Dong , LU Cui-Ying and YE Fang
  In situ Kinetics Study in Chemical Vapor Deposition of Pyrocarbon from Propylene
    The deposition kinetics of pyrocarbon by chemical vapor deposition (CVD) from propylene was investigated by in situ measurements of deposition rates which were measured by Magnetic Suspension Balance TG system. The gas phase products that collected by a l...
    2008 23 (6): 1165-1170 [Abstract ] ( 123 ) [HTML 0KB] [PDF 809KB ]( 148 )
1171 TIAN Zhuo , LI Ke-Zhi , LI He-Jun and SHI Zhen-Hai
  Research on Thermal Conduction and Mechanical Properties for Carbon Foam
    The phenolic resin foam was prepared by using hollow phenolic resin microspher which was made by microcapsule. And under the protection of Ar, the microcapsules were carbonized at 1000¡æ and graphited at 2000¡æ, then the foam was got. Herein the porosity ...
    2008 23 (6): 1171-1174 [Abstract ] ( 117 ) [HTML 0KB] [PDF 485KB ]( 147 )
1175 MA Qian-Cheng , , ZHANG Guo-Jun , KAN Yan-Mei , WANG Pei-Ling and XIA Yi-Ben
  Densification and Mechanical Properties of Boron Carbide Ceramics with Addition of Silicon Hexaboride
    Boron carbide (B4C) ceramics were fabricated by hot-pressing at 2000¡æ for 1h with 2wt% and 5wt% SiB6 additives respectively. The effect of addition of SiB6 on sinterability and mechanical properties of B4C cera...
    2008 23 (6): 1175-1178 [Abstract ] ( 127 ) [HTML 0KB] [PDF 640KB ]( 150 )
1179 WANG Lan-Juan , , LI Chun-Zhong , GU Feng and ZHOU Qiu-Ling
  Morphology and Structure of Carbon Nanocoils Synthesized via the Flame Combustion of Ethanol
    Carbon nanocoils (CNCs) were in situ synthesized by the flame combustion of ethanol using stannic chloride as catalyst precursor. The morphology and structure of CNCs were characterized by means of scanning electron microscope, transmission elect...
    2008 23 (6): 1179-1183 [Abstract ] ( 115 ) [HTML 0KB] [PDF 1760KB ]( 137 )
1184 CHEN Feng , ZHANG Hong-Bo , XIONG Xiang and YAN Zhi-Qiao
  Microstructure and Properties of Carbon Foams Reinforced by CVD PyC
    Two carbon foams with different bulk density, marked as CF-1and CF-2 were prepared from AR mesophase pitch by self-foaming method at 450¡æ under different foaming pressures, 0.1MPa and 3MPa, respectively. Then CF-1 was reinforced by chemical vapor deposit...
    2008 23 (6): 1184-1188 [Abstract ] ( 112 ) [HTML 0KB] [PDF 1056KB ]( 156 )
1189 LU Cui-Ying , CHENG Lai-Fei , ZHANG Li-Tong , XU Yong-Dong and ZHAO Chun-Nian
  Equilibrium Prediction of the Role of Key Species in the Chemical Vapor Deposition of Silicon Carbide
    Based on Gibbs minimum free energy principle, homogeneous equilibrium calculations were focused by Factsage code for MTS/H2 mixture. An assessment was made to determine the key species to SiC deposition. The results indicate that SiCl2
    2008 23 (6): 1189-1192 [Abstract ] ( 121 ) [HTML 0KB] [PDF 492KB ]( 148 )
1193 DU Xuan , WANG Cheng-Yang , CHEN Ming-Ming and JIAO Yang
  Electrochemical Properties of Hybrid Supercapacitor with Nanosized Fe3O4/activated Carbon as Electrodes
    The supercapacitor using nano-structured Fe3O4 and activated carbon (AC) as electrode materials was developed. Fe3O4 magnetic nanoparticles with average particle size of 36nm were synthesized by microwave method...
    2008 23 (6): 1193-1198 [Abstract ] ( 126 ) [HTML 0KB] [PDF 626KB ]( 155 )
1199 ZHOU Shen-Lin , LIU Dan-Min and ZHANG Jiu-Xing
  Fabrication and Characterization of High-purity Nanostructured Bulk LaB6 Polycrystal Cathode Material
    La-LaH2 nanopowders were prepared by hydrogen arc plasma method, and then the mixed nanopowders of La-LaH2 and B were in situ sintered by Sparkle Plasma Sintering (SPS) method in oxygen free system. High-purity LaB6
    2008 23 (6): 1199-1204 [Abstract ] ( 112 ) [HTML 0KB] [PDF 1130KB ]( 147 )
1205 LIU Zhi-Hong , HU Lei , LIU Zhi-Yong and LI Qi-Hou
  Synthesis of Microsized Co3O4 Octahedral by High Temperature Gas-solid Hydrolysis
    A novel method, involving high temperature gas-solid hydrolysis, was proposed for the preparation of micro-Co3O4 powder. The effects of reaction temperature, crystal water content of CoCl2, the addition of inert dispersate...
    2008 23 (6): 1205-1210 [Abstract ] ( 114 ) [HTML 0KB] [PDF 730KB ]( 157 )
1211 GUO Xing-Zhong , LI Hai-Miao , ZHU Xiao-Yi , YANG Hui , FU Pei-Xin and GAO Li-Hua
  Characteristics of SiC/nano-TiN Aqueous Mixed Slurry and Its Spray Drying Behavior
    The aqueous slurries were prepared usingtetramethyl ammonium hydroxide (TMAH) as dispersant, nano-TiN and submicron SiC
powders as starting materials. The dispersion, stabilization mechanism and spray drying behaviors of SiC/nano-TiN aqueous mixed slu...
    2008 23 (6): 1211-1215 [Abstract ] ( 111 ) [HTML 0KB] [PDF 686KB ]( 147 )
1216 CHEN Xin-Zhi , YU Ling-Hui , LIU Qiao-Sheng , WANG Hai-Hui and LI Zhong
  Preparation and Application of Perovskite Hollow Fiber Oxygen Permeable Membrane
    The dense perovskite hollow fiber made of BaCo0.4Fe0.4Zr0.2O3-¦Ä (BCFZ) was prepared by phase inversion spinning followed by sintering. The crystal structure and the microstructures of the hollow fiber ...
    2008 23 (6): 1216-1220 [Abstract ] ( 110 ) [HTML 0KB] [PDF 793KB ]( 135 )
1221 FAN Chuan-Gang , HUANG Xiang-Xian , LIU Wei and CHEN Chu-Sheng
  Preparation and Oxygen Permeation for SrCo0.8Fe0.2O3-¦Ä Tubular Asymmetric Membrane
    The tubular asymmetric membrane (TAM) was prepared by co-firing method with dense top layer of SrCo0.8Fe0.2O3-¦Ä(SCF) and porous substrate layer of (SrCo0.8Fe0.2O3-¦Ä)0.85
    2008 23 (6): 1221-1224 [Abstract ] ( 119 ) [HTML 0KB] [PDF 534KB ]( 144 )
1225 WANG Xian-Wu , YANG Jian-Hua , LU Jin-Ming , WANG Tong-Hua and WANG Jin-Qu
  Synthesis of Sn-Substituted ZSM-5/Carbon Zeolite Membrane and Application in Separation of Acetic Acid/water Mixtures by Pervaporation
    Study on the synthesis and characterization of Sn-ZSM-5 zeolite was carried out. The Sn-ZSM-5 zeolites were prepared from the clear solution of Si(OCH2CH3)4/SnCl4/NaOH/TPABr/H2O by hydrothermal method...
    2008 23 (6): 1225-1230 [Abstract ] ( 106 ) [HTML 0KB] [PDF 943KB ]( 133 )
1231 YU Chi-Chao , ZHANG Ling-Xia , QIN Fei , LI Jiang-Tian , SHI Jian-Lin and YAN Dong-Sheng
  PAMAM-SBA-15 Composite in Application of Heavy Metals Ions Adsorption
    Using 3-aminopropyltriethoxysilan (APTES) to modify the interior surface of SBA-15 channels, PAMAM of generation 1 and generation 2 were successfully grafted in the meso-channels of SBA-15. The PAMAM-SBA-15 hybrids are employed in the adsorption of heavy ...
    2008 23 (6): 1231-1235 [Abstract ] ( 108 ) [HTML 0KB] [PDF 479KB ]( 140 )
1236 HE Ming , XU Li , GU Xiao-Li , LUO Zhen-Yang and LU Xiao-Hua
  Preparation and Mechanism Study of Mesoporous Titania Whiskers
    A simple novel procedure for the synthesis of mesoporous titania whiskers from potassium dititanate (K2Ti2O5) was reported. Nanostructure whisker was obtained via controlling mesostructure transition process of th...
    2008 23 (6): 1236-1240 [Abstract ] ( 113 ) [HTML 0KB] [PDF 896KB ]( 130 )
1241 WANG Ying-Bo , LU Xiong , FENG Bo , QU Shu-Xin , WENG Jie and CHEN Jian-Min
  Investigation of HA/chitosan Composite Coatings Prepared by Sol-Gel on Alkali Treated Titanium Surfaces
    Hydroxyapatite/chitosan (HA/CS) composite coatings were prepared on titanium surfaces by hydro-thermal synthesis and Sol-Gel method. The composition, structure, morphology and biocompatibility of composite coatings were characterized. Ti surfaces are conv...
    2008 23 (6): 1241-1245 [Abstract ] ( 108 ) [HTML 0KB] [PDF 972KB ]( 147 )
1246 XU Yi , , HUANG Nan and SUN Hong
  Blood Compatibility of Titanium Oxide Films Modified by Hydrogen Plasm